Hi Fabrice
On 12/12/22 11:44, Fabrice Gasnier wrote:
> Add support for USB2514B onboard hub on stm32mp157c EV1 board. The HUB
> is supplied by a 3v3 PMIC regulator.
>
> [backport from linux ad9591b01d24]
> Signed-off-by: Fabrice Gasnier <fabrice.gasn...@foss.st.com>
> ---
>
> arch/arm/dts/stm32mp157c-ev1.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/dts/stm32mp157c-ev1.dts
> b/arch/arm/dts/stm32mp157c-ev1.dts
> index d142dd30e16b..07bcd7c50672 100644
> --- a/arch/arm/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/dts/stm32mp157c-ev1.dts
> @@ -362,6 +362,14 @@
> &usbh_ehci {
> phys = <&usbphyc_port0>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + /* onboard HUB */
> + hub@1 {
> + compatible = "usb424,2514";
> + reg = <1>;
> + vdd-supply = <&v3v3>;
> + };
> };
>
> &usbotg_hs {
Applied on u-boot-stm32/master
Thanks
