From: Philippe Schenker <[email protected]> sc_pm_setup_uart() returns int, not sc_err_t.
Signed-off-by: Philippe Schenker <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> --- v3: added Reviewed-by: Fabio v2: new patch --- board/toradex/apalis-imx8/apalis-imx8.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/board/toradex/apalis-imx8/apalis-imx8.c b/board/toradex/apalis-imx8/apalis-imx8.c index 743d015b8360..43456e8af995 100644 --- a/board/toradex/apalis-imx8/apalis-imx8.c +++ b/board/toradex/apalis-imx8/apalis-imx8.c @@ -169,12 +169,12 @@ void board_mem_get_layout(u64 *phys_sdram_1_start, int board_early_init_f(void) { sc_pm_clock_rate_t rate = SC_80MHZ; - sc_err_t err = 0; + int ret; /* Set UART1 clock root to 80 MHz and enable it */ - err = sc_pm_setup_uart(SC_R_UART_1, rate); - if (err != SC_ERR_NONE) - return 0; + ret = sc_pm_setup_uart(SC_R_UART_1, rate); + if (ret) + return ret; setup_iomux_uart(); -- 2.25.1
