From: Takahiro Kuwano <[email protected]> Cypress defines two flavors of configuration registers, volatile and non volatile, and both use the same bit fields. Rename the bitfields in the configuration registers so that they can be used for both flavors.
Suggested-by: Tudor Ambarus <[email protected]> Signed-off-by: Takahiro Kuwano <[email protected]> --- drivers/mtd/spi/spi-nor-core.c | 8 ++++---- include/linux/mtd/spi-nor.h | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 1ea8363d9f89..a3198253ca63 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -3373,7 +3373,7 @@ static int spi_nor_cypress_octal_dtr_enable(struct spi_nor *nor) if (ret) return ret; - buf = SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24; + buf = SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24; op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR2V, 1), SPI_MEM_OP_NO_DUMMY, @@ -3396,7 +3396,7 @@ static int spi_nor_cypress_octal_dtr_enable(struct spi_nor *nor) if (ret) return ret; - buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN; + buf = SPINOR_REG_CYPRESS_CFR5_OCT_DTR_EN; op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR5V, 1), SPI_MEM_OP_NO_DUMMY, @@ -3444,7 +3444,7 @@ static int s28hx_t_setup(struct spi_nor *nor, const struct flash_info *info, if (ret) return ret; - if (!(buf & SPINOR_REG_CYPRESS_CFR3V_UNISECT)) + if (!(buf & SPINOR_REG_CYPRESS_CFR3_UNISECT)) nor->erase = s28hx_t_erase_non_uniform; return spi_nor_default_setup(nor, info, params); @@ -3511,7 +3511,7 @@ static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor, if (ret) return ret; - if (buf & SPINOR_REG_CYPRESS_CFR3V_PGSZ) + if (buf & SPINOR_REG_CYPRESS_CFR3_PGSZ) params->page_size = 512; else params->page_size = 256; diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 2fb4595fc756..605cddef4d06 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -189,15 +189,15 @@ #define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ #define SPINOR_OP_S28_SE_4K 0x21 #define SPINOR_REG_CYPRESS_CFR2V 0x00800003 -#define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24 0xb +#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24 0xb #define SPINOR_REG_CYPRESS_CFR3V 0x00800004 -#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */ -#define SPINOR_REG_CYPRESS_CFR3V_UNISECT BIT(3) /* Uniform sector mode */ +#define SPINOR_REG_CYPRESS_CFR3_PGSZ BIT(4) /* Page size. */ +#define SPINOR_REG_CYPRESS_CFR3_UNISECT BIT(3) /* Uniform sector mode */ #define SPINOR_REG_CYPRESS_CFR5V 0x00800006 #define SPINOR_REG_CYPRESS_CFR5_BIT6 BIT(6) #define SPINOR_REG_CYPRESS_CFR5_DDR BIT(1) #define SPINOR_REG_CYPRESS_CFR5_OPI BIT(0) -#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN \ +#define SPINOR_REG_CYPRESS_CFR5_OCT_DTR_EN \ (SPINOR_REG_CYPRESS_CFR5_BIT6 | SPINOR_REG_CYPRESS_CFR5_DDR | \ SPINOR_REG_CYPRESS_CFR5_OPI) #define SPINOR_OP_CYPRESS_RD_FAST 0xee -- 2.25.1
