On Wed, Jan 19, 2011 at 07:59:10AM +0100, Wolfgang Denk wrote: > > Based on empirical testing, I've discovered that re-running > > init_baudrate() after env_relocate() fixes everything. The serial > > console uses the baud rate stored in the "baudrate" variable now, and > > some ordering of display outputs needs to be tweaked so that gibberish > > isn't output in the interim. > > You have diagnosed where the problem is, but you come to the wrong > conclusions and instead of fixing the problem you paint over it. > > Obviously getenv_r("baudrate") is not returning the right value for > you. > > You should first check, what exactly it returns. > > Then you should check why it is not reading the correct data, as it is > supposed to do. > > Then you should fix _that_ problem.
Thanks for the feedback. I hope that someone else can continue this work now that I've identified the problem and have developed a solution that works for my needs with no obvious side-effects. Given that this is such base functionality, I'm surprised that no one else has mentioned anything up to this point; I guess no one else attempts to change the baud rate for subsequent reboots? (Rhetorical, no need to answer.) All the best with the upcoming release, Chris _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot