Copied from e83a7e94532 ("powerpc/mpc83xx: Zero boot_flags arg for
calling board_init_f()")The argument boot_flags of board_init_f() is not used at all in the powerpc specific board.c init sequence. Now with the generic init sequence, this boot_flags arg is used by board_init_f(). This patch sets the r3 register that is used to pass the boot_flags argument from the start.S board_init_f() call to 0 prior to the function call to avoid unknown content to end up in gd->flags. Signed-off-by: Christophe Leroy <[email protected]> Fixes: 09f3ca3dd53 ("arm, powerpc: select SYS_GENERIC_BOARD") --- arch/powerpc/cpu/mpc8xx/start.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S index 0ebb7b33a8b..51b5f5068ef 100644 --- a/arch/powerpc/cpu/mpc8xx/start.S +++ b/arch/powerpc/cpu/mpc8xx/start.S @@ -171,6 +171,7 @@ in_flash: lis r3, CONFIG_SYS_IMMR@h bl cpu_init_f /* run low-level CPU init code (from Flash) */ + li r3, 0 /* clear boot_flag for calling board_init_f */ bl board_init_f /* run 1st part of board init code (from Flash) */ /* NOTREACHED - board_init_f() does not return */ -- 2.38.1
