Dear Daniel Gorsulowski, > Hello Reinhard, > > Reinhard Meyer wrote: >> Dear Daniel Gorsulowski,
... >> The at91sam9260(9xe)ek board builds fine and works. > > I can confirm that. > >> Use that as a template or reference what to do. >> You should *only* need to adapt board/*/files and your configs/<board>.h >> files. And of course updated entries in boards.cfg. > > Not quiet. I had to fix arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c > additionally. Yes, of course... I had only "reworked" the 9260 variant yet. You should need to change it similarly to at91sam9260_devices.c... > > With my adoptions, my boards builds fine. But they do not boot. > Can you really confirm that the at91sam9260ek board boots? I have no > chance to debug my problems, so I have no idea, why my boards does not boot. Yes it does. What exactly does "does not boot" mean? No message at all? Check that your AT91Bootstrap loads u-boot to a sane address not at the very end of DRAM, and that CONFIG_SYS_TEXT_BASE is exactly the address where AT91Bootstrap loads u-boot. (I changed AT91Bootstrap to load u-boot to the very begin of DRAM for our boards.) > > Nevertheless, should I send my patches for reviewing? > Of course. We might see something that helps you. Best Regards, Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
