From: Takahiro Kuwano <takahiro.kuw...@infineon.com>
Some macro definitions used in Infineon(Cypress) S25 and S28 series are
redundant and some have inconsistent prefix. This patch removes redundant
ones and renames some to have same prefix as others.
Signed-off-by: Takahiro Kuwano <takahiro.kuw...@infineon.com>
---
drivers/mtd/spi/spi-nor-core.c | 22 ++++++++++++----------
include/linux/mtd/spi-nor.h | 11 +++--------
2 files changed, 15 insertions(+), 18 deletions(-)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 2c3116ee5300..74ac1fc8c41a 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -330,7 +330,7 @@ static int spansion_read_any_reg(struct spi_nor *nor, u32
addr, u8 dummy,
u8 *val)
{
struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDAR, 1),
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1),
SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 1),
SPI_MEM_OP_DUMMY(dummy / 8, 1),
SPI_MEM_OP_DATA_IN(1, NULL, 1));
@@ -341,7 +341,7 @@ static int spansion_read_any_reg(struct spi_nor *nor, u32
addr, u8 dummy,
static int spansion_write_any_reg(struct spi_nor *nor, u32 addr, u8 val)
{
struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRAR, 1),
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1),
SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 1),
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(1, NULL, 1));
@@ -712,7 +712,7 @@ static int set_4byte(struct spi_nor *nor, const struct
flash_info *info,
*/
static int spansion_sr_ready(struct spi_nor *nor, u32 addr_base, u8 dummy)
{
- u32 reg_addr = addr_base + SPINOR_REG_ADDR_STR1V;
+ u32 reg_addr = addr_base + SPINOR_REG_CYPRESS_STR1V;
u8 sr;
int ret;
@@ -1820,7 +1820,7 @@ static int macronix_quad_enable(struct spi_nor *nor)
static int spansion_quad_enable_volatile(struct spi_nor *nor, u32 addr_base,
u8 dummy)
{
- u32 addr = addr_base + SPINOR_REG_ADDR_CFR1V;
+ u32 addr = addr_base + SPINOR_REG_CYPRESS_CFR1V;
u8 cr;
int ret;
@@ -3249,7 +3249,8 @@ static int s25_setup(struct spi_nor *nor, const struct
flash_info *info,
* uniform 128KB only due to complexity of non-uniform layout.
*/
if (nor->info->id[4] == S25FS256T_ID4) {
- ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_ARCFN, 8, &cr);
+ ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_ARCFN, 8,
+ &cr);
if (ret)
return ret;
@@ -3263,10 +3264,10 @@ static int s25_setup(struct spi_nor *nor, const struct
flash_info *info,
* Read CFR3V to check if uniform sector is selected. If not, assign an
* erase hook that supports non-uniform erase.
*/
- ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_CFR3V, 0, &cr);
+ ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_CFR3V, 0, &cr);
if (ret)
return ret;
- if (!(cr & CFR3V_UNHYSA))
+ if (!(cr & SPINOR_REG_CYPRESS_CFR3_UNISECT))
nor->erase = s25_erase_non_uniform;
/*
@@ -3327,12 +3328,13 @@ static int s25_post_bfpt_fixup(struct spi_nor *nor,
* dies are configured to 512B buffer.
*/
for (addr = 0; addr < params->size; addr += SZ_128M) {
- ret = spansion_read_any_reg(nor, addr + SPINOR_REG_ADDR_CFR3V,
- 0, &cfr3v);
+ ret = spansion_read_any_reg(nor,
+ addr + SPINOR_REG_CYPRESS_CFR3V, 0,
+ &cfr3v);
if (ret)
return ret;
- if (!(cfr3v & CFR3V_PGMBUF)) {
+ if (!(cfr3v & SPINOR_REG_CYPRESS_CFR3_PGSZ)) {
params->page_size = 256;
return 0;
}
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 2861b73edbce..f9a55c8e740c 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -136,14 +136,6 @@
#define SPINOR_OP_BRRD 0x16 /* Bank register read */
#define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */
#define SPINOR_OP_EX4B_CYPRESS 0xB8 /* Exit 4-byte mode */
-#define SPINOR_OP_RDAR 0x65 /* Read any register */
-#define SPINOR_OP_WRAR 0x71 /* Write any register */
-#define SPINOR_REG_ADDR_STR1V 0x00800000
-#define SPINOR_REG_ADDR_CFR1V 0x00800002
-#define SPINOR_REG_ADDR_CFR3V 0x00800004
-#define SPINOR_REG_ADDR_ARCFN 0x00000006
-#define CFR3V_UNHYSA BIT(3) /* Uniform sectors or not */
-#define CFR3V_PGMBUF BIT(4) /* Program buffer size */
/* Used for Micron flashes only. */
#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
@@ -189,6 +181,9 @@
#define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */
#define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */
#define SPINOR_OP_S28_SE_4K 0x21
+#define SPINOR_REG_CYPRESS_ARCFN 0x00000006
+#define SPINOR_REG_CYPRESS_STR1V 0x00800000
+#define SPINOR_REG_CYPRESS_CFR1V 0x00800002
#define SPINOR_REG_CYPRESS_CFR2V 0x00800003
#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24 0xb
#define SPINOR_REG_CYPRESS_CFR3V 0x00800004
--
2.25.1
