On 2/16/23 18:01, Tom Rini wrote:
On Thu, Feb 16, 2023 at 04:29:56PM +0100, Heinrich Schuchardt wrote:
Some boards provide main U-Boot as a dedicated partition to SPL.
Currently we can define either a fixed partition number or an MBR
partition type to define which partition is to be used.
Partition numbers tend to conflict with established partitioning schemes
of Linux distros. MBR partitioning is more and more replaced by GPT
partitioning.
Allow defining a partition type GUID identifying the partition to load
main U-Boot from.
Signed-off-by: Heinrich Schuchardt <[email protected]>
[snip]
+config SYS_MMCSD_RAW_MODE_U_BOOT_GPT_PARTITION_TYPE
+ string "GPT Partition Type on the MMC to load U-Boot from"
+ depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_GPT_PARTITION_TYPE
+ default d2f002f8-e4e7-4269-b8ac-3bb6fabeaff6
Is there a reason to use any other GUID value here? If not, just define,
or use it directly with a comment. If there is a reason for other
values to be used:
Board vendors already differ in the partition GUIDs they use, e.g.
SiFive:
SPL: 5B193300-FC78-40CD-8002-E86C45580B47
Main U-Boot: 2E54B353-1271-4842-806F-E436D6AF6985
StarFive
SPL: 2E54B353-1271-4842-806F-E436D6AF6985 (sic)
Microchip Icicle Board:
SPL: 21686148-6449-6E6F-744E-656564454649
Using unique IDs per board allow to create SD card images where U-Boot
for multiple boards is installed in parallel:
The boot ROM will select the board specific SPL via a unique ID and then
SPL will use another unique ID to load the matching main U-Boot.
I only added a default value here to provide a formatting sample.
Best regards
Heinrich
Reviewed-by: Tom Rini <[email protected]>
