On 02/11/2023 07:29 AM, Linus Walleij wrote:
From: Álvaro Fernández Rojas <nolt...@gmail.com> Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall always be done without ECC enabled. This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2 clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed from ff ff ff to 00 00 00, reporting incorrect ECC errors. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com> Acked-by: Brian Norris <computersforpe...@gmail.com> Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-nolt...@gmail.com [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.wall...@linaro.org> --- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index b2ebcaf7a5bf..efbf9a3120a4 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -2515,6 +2515,12 @@ static int brcmnand_init_cs(struct brcmnand_host *host, ofnode dn) ret = nand_register(0, mtd); #endif /* __UBOOT__ */+ /* If OOB is written with ECC enabled it will cause ECC errors */+ if (is_hamming_ecc(host->ctrl, &host->hwcfg)) { + chip->ecc.write_oob = brcmnand_write_oob_raw; + chip->ecc.read_oob = brcmnand_read_oob_raw; + } + return ret; }
Acked-by: William Zhang <william.zh...@broadcom.com>
smime.p7s
Description: S/MIME Cryptographic Signature
