Hi Pali,
On 2/28/23 23:41, Pali Rohár wrote:
<snip>
So my question is, why are less patches in your github branch? Or did
you try to re-send with this smaller amount of patches and this did not
work because of the crashing mail server?
I cannot understand how it is possible. There should be 59 patches. I
have not created / sent more patches. If there is missing some patch on
Github I can double check it...
Most likely I have fat-fingered myself something here. Please forget
about this. My fault.
Ok. So do you have all patches in the correct form?
Yes. All fine.
Thanks,
Stefan
Thanks,
Stefan
Thanks,
Stefan
Thanks,
Stefan
> Thanks,
> Stefan
>
> >
> > >
> > > Pali Rohár (59):
> > > tools: kwbimage: Fix generating, verifying and extracting SDIO
> > > kwbimage
> > > tools: kwboot: Fix parsing SDIO kwbimage
> > > arm: mvebu: spl: Fix parsing SDIO kwbimage
> > > cmd: mvebu/bubt: Fix parsing SDIO kwbimage
> > > tools: kwbimage: Fix generating, verifying and extracting SATA
> > > kwbimage
> > > tools: kwboot: Fix parsing SATA kwbimage
> > > arm: mvebu: spl: Fix parsing SATA kwbimage
> > > cmd: mvebu/bubt: Fix parsing SATA kwbimage
> > > arm: mvebu: spl: Remove checks for BOOT_DEVICE_MMC2 and
> > > BOOT_DEVICE_MMC2_2
> > > arm: mvebu: spl: Load proper U-Boot from selected eMMC
boot partition
> > > spl: mmc: Allow to disable SYS_MMCSD_FS_BOOT_PARTITION
> > > arm: mvebu: spl: Fix support for loading U-Boot proper
from SD card
> > > tools: kwboot: Add more documentation references
> > > tools: kwboot: Add image type documentation
> > > tools: kwboot: Fix parsing UART image without data checksum
> > > tools: kwboot: Validate optional kwbimage v1 headers
> > > tools: kwboot: Add check that kwbimage contains DDR init code
> > > tools: kwboot: Fix patching of SPI/NOR XIP images
> > > tools: kwboot: Show image type and error parsing reasons
> > > cmd: mvebu/bubt: Add support for selecting eMMC HW partition
> > > cmd: mvebu/bubt: Add support for writing image to SATA disk
> > > cmd: mvebu/bubt: Add support for reading image from the
SATA disk
> > > partition
> > > cmd: mvebu/bubt: Rename variable image_size to hdr_size
> > > cmd: mvebu/bubt: Mark all local symbols as static
> > > cmd: mvebu/bubt: Do not modify image in A8K
check_image_header()
> > > cmd: mvebu/bubt: Check also A8K boot image checksum
> > > cmd: mvebu/bubt: Set correct default image name for 32-bit
Armada SoCs
> > > cmd: mvebu/bubt: Better guess default MVEBU_*_BOOT option
> > > cmd: mvebu/bubt: Fix warnings: unused variable
'secure_mode' and
> > > 'fuse_read_u64' defined but not used
> > > cmd: mvebu/bubt: Enable command by default
> > > tools: kwbimage: Fix dumping register set / DATA commands
> > > tools: kwbimage: Fix endianity when dumping NAND_PAGE_SIZE
> > > tools: kwbimage: Fix dumping NAND_BADBLK_LOCATION
> > > tools: kwbimage: Fix dumping NAND_BLKSZ
> > > tools: kwbimage: Fix generating of kwbimage v0 header checksum
> > > tools: kwbimage: Fix endianity when printing kwbimage header
> > > tools: kwbimage: Reject mkimage -F option
> > > tools: kwbimage: Add support for dumping NAND_BLKSZ for v0
images
> > > tools: kwbimage: Print binary image offset as size
> > > tools: kwbimage: Print image data offset when printing
kwbimage header
> > > tools: kwbimage: Simplify add_secure_header_v1()
> > > tools: kwbimage: Rename imagesz to dataoff
> > > tools: kwbimage: Fix generating secure boot data image
signature
> > > tools: kwbimage: Fix invalid secure boot header signature
> > > tools: mkimage: Do not fill legacy_img_hdr for non-legacy
XIP images
> > > tools: kwbimage: Add support for XIP SPI/NOR images
> > > tools: mkimage: Print human readable error when -d is not
specified
> > > tools: mkimage: Do not try to open datafile when it is skipped
> > > tools: kwbimage: Add support for creating an image with no
data
> > > arm: mvebu: Add support for generating NAND kwbimage
> > > arm: mvebu: Add support for generating PEX kwbimage
> > > arm: mvebu: Fix description of
MVEBU_SPL_BOOT_DEVICE_(SPI|MMC) options
> > > arm: mvebu: db-88f6820-amc: Add defconfig for NAND booting
> > > arm: mvebu: clearfog: Add defconfig for SATA booting
> > > arm: mvebu: Remove A39x relicts
> > > arm: mvebu: Fix comment about CPU_ATTR_BOOTROM mapping
> > > arm: mvebu: Define env_sf_get_env_addr() also for Proper
U-Boot
> > > arm: mvebu: Define SPL memory maps
> > > doc/kwboot.1: Update example description
> > >
> > > arch/arm/mach-mvebu/Kconfig | 23 +-
> > > arch/arm/mach-mvebu/Makefile | 13 +
> > > arch/arm/mach-mvebu/cpu.c | 11 +-
> > > arch/arm/mach-mvebu/include/mach/cpu.h | 21 ++
> > > arch/arm/mach-mvebu/kwbimage.cfg.in
<http://kwbimage.cfg.in> | 5 +
> > > .../serdes/a38x/high_speed_env_spec.c | 4 +-
> > > .../serdes/a38x/high_speed_env_spec.h | 4 +-
> > > arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 14 +-
> > > arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 30 --
> > > arch/arm/mach-mvebu/spl.c | 84 +++--
> > > cmd/mvebu/Kconfig | 18 ++
> > > cmd/mvebu/bubt.c | 253
++++++++++++---
> > > common/spl/Kconfig | 9 +
> > > common/spl/spl_mmc.c | 12 +-
> > > ...rfog_defconfig => clearfog_sata_defconfig} | 2 +-
> > > ...efconfig => db-88f6820-amc_nand_defconfig} | 6 +-
> > > doc/kwboot.1 | 3 +-
> > > doc/mvebu/cmd/bubt.txt | 25 +-
> > > drivers/mtd/nand/raw/Kconfig | 4 +-
> > > tools/kwbimage.c | 297
+++++++++++-------
> > > tools/kwboot.c | 200
+++++++++++-
> > > tools/mkimage.c | 11 +-
> > > 22 files changed, 768 insertions(+), 281 deletions(-)
> > > copy configs/{clearfog_defconfig =>
clearfog_sata_defconfig} (98%)
> > > copy configs/{db-88f6820-amc_defconfig =>
db-88f6820-amc_nand_defconfig} (92%)
> > >
> > > --
> > > 2.20.1
> > >
>
> Viele Grüße,
> Stefan Roese
>
> --
> DENX Software Engineering GmbH, Managing Director: Erika Unter
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email:
s...@denx.de <mailto:s...@denx.de>
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
