On 2/28/23 12:19 PM, Jan Kiszka wrote:
From: Jan Kiszka <jan.kis...@siemens.com>
This feature is desired on the platform.
As you can see here your split defconfigs are already out of sync
and need special maintenance :)
Andrew
Signed-off-by: Jan Kiszka <jan.kis...@siemens.com>
---
configs/iot2050_pg1_defconfig | 1 +
configs/iot2050_pg2_defconfig | 5 +----
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/configs/iot2050_pg1_defconfig b/configs/iot2050_pg1_defconfig
index 258ad4c87e5..45c88fc134e 100644
--- a/configs/iot2050_pg1_defconfig
+++ b/configs/iot2050_pg1_defconfig
@@ -146,3 +146,4 @@ CONFIG_WDT=y
CONFIG_WDT_K3_RTI=y
CONFIG_WDT_K3_RTI_LOAD_FW=y
CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN=y
diff --git a/configs/iot2050_pg2_defconfig b/configs/iot2050_pg2_defconfig
index 2ff360b0623..d2bdeab593b 100644
--- a/configs/iot2050_pg2_defconfig
+++ b/configs/iot2050_pg2_defconfig
@@ -25,11 +25,8 @@ CONFIG_ENV_OFFSET_REDUND=0x6a0000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80100000
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
-# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTSTAGE=y
CONFIG_SHOW_BOOT_PROGRESS=y
@@ -78,7 +75,6 @@ CONFIG_SPL_OF_LIST="k3-am65-iot2050-spl"
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
@@ -150,3 +146,4 @@ CONFIG_WDT=y
CONFIG_WDT_K3_RTI=y
CONFIG_WDT_K3_RTI_LOAD_FW=y
CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN=y
