This patch set converts the LS1088A and LX216X based boards to DM_SERIAL. Since we don't want to introduce even more differences between the U-Boot's and Linux's device trees, the DT patches make the necessary updates so that the serial nodes are synced with their counterpart.
We also update the LS1088A's defconfigs so that DM_SERIAL is enabled. On LX2160A's defconfigs these updates are not needed since DM_SERIAL was already enabled. On the other hand, we did remove the hardcoded PL01X device instantiation from the board files in the last patch. Ioana Ciornei (10): arch: arm: dts: fsl-ls1088a.dtsi: add an 'soc' node arch: arm: dts: fsl-ls1088a.dtsi: move the serial nodes under soc arch: arm: dts: fsl-ls1088a.dtsi: sync serial nodes with Linux arch: arm: dts: fsl-ls1088a.dtsi: tag serial nodes with bootph-all configs: ls1088a: enable DM_SERIAL arch: arm: dts: fsl-lx2160a.dtsi: add an 'soc' node arch: arm: dts: fsl-lx2160a.dtsi: move the serial nodes under soc arch: arm: dts: fsl-lx2160a.dtsi: sync serial nodes with Linux arch: arm: dts: fsl-lx2160a.dtsi: tag serial nodes with bootph-all board: freescale: lx2160a: remove the PL01X device instantiation arch/arm/dts/fsl-ls1088a-qds.dtsi | 8 +++ arch/arm/dts/fsl-ls1088a-rdb.dts | 8 +++ arch/arm/dts/fsl-ls1088a-ten64.dts | 6 +- arch/arm/dts/fsl-ls1088a.dtsi | 61 +++++++++++----- arch/arm/dts/fsl-lx2160a-qds.dtsi | 11 ++- arch/arm/dts/fsl-lx2160a-rdb.dts | 11 ++- arch/arm/dts/fsl-lx2160a.dtsi | 74 ++++++++++++-------- board/freescale/lx2160a/lx2160a.c | 34 --------- configs/ls1088aqds_tfa_defconfig | 4 +- configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 4 +- configs/ls1088ardb_tfa_defconfig | 4 +- 11 files changed, 138 insertions(+), 87 deletions(-) -- 2.25.1
