Insert missing space in front of asterisk to avoid checkpatch warning. Replace 'beeing' with 'being' as well, to fix another checkpatch warning.
Signed-off-by: Marek Vasut <[email protected]> --- Cc: Jim Liu <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Patrice Chotard <[email protected]> Cc: Samuel Holland <[email protected]> Cc: Sumit Garg <[email protected]> Cc: Weijie Gao <[email protected]> --- include/generic-phy.h | 108 +++++++++++++++++++++--------------------- 1 file changed, 54 insertions(+), 54 deletions(-) diff --git a/include/generic-phy.h b/include/generic-phy.h index fa5f6fa3636..8dca21b1283 100644 --- a/include/generic-phy.h +++ b/include/generic-phy.h @@ -69,72 +69,72 @@ struct phy_ops { int (*init)(struct phy *phy); /** - * exit - de-initialize the PHY device - * - * Hardware de-intialization should be done here. Every step done in - * init() should be undone here. - * This could be used to suspend the phy to reduce power consumption or - * to put the phy in a known condition before booting the OS (though it - * is NOT called automatically before booting the OS) - * If power_off() is not implemented, it must power down the phy. - * - * @phy: PHY port to be de-initialized - * Return: 0 if OK, or a negative error code - */ + * exit - de-initialize the PHY device + * + * Hardware de-intialization should be done here. Every step done in + * init() should be undone here. + * This could be used to suspend the phy to reduce power consumption or + * to put the phy in a known condition before booting the OS (though it + * is NOT called automatically before booting the OS) + * If power_off() is not implemented, it must power down the phy. + * + * @phy: PHY port to be de-initialized + * Return: 0 if OK, or a negative error code + */ int (*exit)(struct phy *phy); /** - * reset - resets a PHY device without shutting down - * - * @phy: PHY port to be reset - * - * During runtime, the PHY may need to be reset in order to - * re-establish connection etc without being shut down or exit. - * - * Return: 0 if OK, or a negative error code - */ + * reset - resets a PHY device without shutting down + * + * @phy: PHY port to be reset + * + * During runtime, the PHY may need to be reset in order to + * re-establish connection etc without being shut down or exit. + * + * Return: 0 if OK, or a negative error code + */ int (*reset)(struct phy *phy); /** - * power_on - power on a PHY device - * - * @phy: PHY port to be powered on - * - * During runtime, the PHY may need to be powered on or off several - * times. This function is used to power on the PHY. It relies on the - * setup done in init(). If init() is not implemented, it must take care - * of setting up the context (PLLs, ...) - * - * Return: 0 if OK, or a negative error code - */ + * power_on - power on a PHY device + * + * @phy: PHY port to be powered on + * + * During runtime, the PHY may need to be powered on or off several + * times. This function is used to power on the PHY. It relies on the + * setup done in init(). If init() is not implemented, it must take care + * of setting up the context (PLLs, ...) + * + * Return: 0 if OK, or a negative error code + */ int (*power_on)(struct phy *phy); /** - * power_off - power off a PHY device - * - * @phy: PHY port to be powered off - * - * During runtime, the PHY may need to be powered on or off several - * times. This function is used to power off the PHY. Except if - * init()/deinit() are not implemented, it must not de-initialize - * everything. - * - * Return: 0 if OK, or a negative error code - */ + * power_off - power off a PHY device + * + * @phy: PHY port to be powered off + * + * During runtime, the PHY may need to be powered on or off several + * times. This function is used to power off the PHY. Except if + * init()/deinit() are not implemented, it must not de-initialize + * everything. + * + * Return: 0 if OK, or a negative error code + */ int (*power_off)(struct phy *phy); /** - * configure - configure a PHY device - * - * @phy: PHY port to be configured - * @params: PHY Parameters, underlying data is specific to the PHY function - * - * During runtime, the PHY may need to be configured for it's main function. - * This function configures the PHY for it's main function following - * power_on/off() after beeing initialized. - * - * Return: 0 if OK, or a negative error code - */ + * configure - configure a PHY device + * + * @phy: PHY port to be configured + * @params: PHY Parameters, underlying data is specific to the PHY function + * + * During runtime, the PHY may need to be configured for it's main function. + * This function configures the PHY for it's main function following + * power_on/off() after being initialized. + * + * Return: 0 if OK, or a negative error code + */ int (*configure)(struct phy *phy, void *params); }; -- 2.39.2
