Signed-off-by: Asen Dimov <di...@ronetix.at>
---
board/ronetix/pm9g45/pm9g45.c | 15 +++++++++++++++
include/configs/pm9g45.h | 5 +++++
2 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index 79b7c9d..0e1d6b2 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -96,6 +96,8 @@ static void pm9g45_nand_hw_init(void)
static void pm9g45_macb_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE;
+ unsigned long erstl;
/*
* PD2 enables the 50MHz oscillator for Ethernet PHY
@@ -120,6 +122,19 @@ static void pm9g45_macb_hw_init(void)
at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0);
at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0);
+ erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
+
+ /* Need to reset PHY -> 500ms reset */
+ writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
+ AT91_RSTC_MR_URSTEN, &rstc->mr);
+ writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
+
+ /* Wait for end hardware reset */
+ while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL));
+
+ /* Restore NRST value */
+ writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+
/* Re-enable pull-up */
at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1);
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index ec51ccf..4d8089f 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -125,6 +125,11 @@
#define CONFIG_NET_MULTI 1
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R 1
+#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_CMD_MII
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+/* MAC is Organizationally Unique Identifier + 3 octects user numbers */
+#define CONFIG_ETHADDR "02:00:00:fe:ed:00"
/* USB */
#define CONFIG_USB_ATMEL
--
1.5.5.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
