On Fri, Feb 10, 2023 at 6:49 PM Tom Rini <tr...@konsulko.com> wrote: > On Thu, Feb 02, 2023 at 12:37:45AM +0100, Linus Walleij wrote: > > > This adds a simple Northstar "BRCMNS" board to be used with > > the BCM4709x and BCM5301x chips. > > > > The main intention is to use this with the D-Link DIR-890L > > and DIR-885L routers for loading the kernel into RAM from > > NAND memory using the BCH-1 ECC and using the separately > > submitted SEAMA load command, so we are currently not adding > > support for things such as networking. > > > > If other board need other ECC for example, they need to > > create a separate DTS file and augment the code, but I don't > > know if any other users will turn up. > > > > Cc: Rafał Miłecki <ra...@milecki.pl> > > Signed-off-by: Linus Walleij <linus.wall...@linaro.org> > > As it stands, this fails to link: > arm: + bcmns > +(bcmns) arm-linux-gnueabi-ld.bfd: drivers/mtd/nand/raw/nand.o: in function > `nand_init': > +(bcmns) drivers/mtd/nand/raw/nand.c:159: undefined reference to > `board_nand_init' > +(bcmns) make[1]: *** [Makefile:1752: u-boot] Error 1 > +(bcmns) make: *** [Makefile:177: sub-make] Error 2
This is because the iproc NAND driver is a dependency, I will collect the ACKS on those and resend the whole bundle instead, thanks! Yours, Linus Walleij
