On 4/4/23 7:13 AM, Neha Malcom Francis wrote:
This series aims to eliminate the use of additional custom repositories such as k3-image-gen (K3 Image Generation) repo that was plumbed into the U-Boot build flow to generate boot images for TI K3 platform devices. And instead, we move towards using binman that aligns better with the community standard build flow.This series uses binman for all K3 platforms supported on U-Boot currently; both HS (High Security) and GP (General Purpose) devices. Background on using k3-image-gen: * TI K3 devices require a SYSFW (System Firmware) image consisting of a signed system firmware image and board configuration binaries, this is needed to bring up system firmware during U-Boot R5 SPL startup. * Board configuration data contain board-specific information such as resource management, power management and security. Series intends to use binman to take over the packaging and signing for the R5 bootloader images tiboot3.bin (and sysfw.itb, for non-combined boot flow) instead of k3-image-gen. Series also packages the A72/A53 bootloader images (tispl.bin and u-boot.img) using ATF, OPTEE and DM (Device Manager) Changes in v2: - removed all external scripts - created ti-board-config etype to support generation of board config binaries - created ti-secure and ti-secure-rom etypes to handle signing instead of using external TI_SECURE_DEV_PKG - updated openssl btool to support x509 certificate generation - dropped Makefile changes to obtain external binary components, moving to using BINMAN_INDIRS to achieve the same
Another thing that got changed is you seem to have dropped the documentation update patch from v1. The documentation change is the best part as it shows how much easier this series makes building U-Boot for K3! :) I did notice a build error when trying this with am62x_evm_r5_defconfig. I don't think this series caused the issue, but it does expose the issue. Fix sent here[0]. So if anyone has issues building this series try that patch. Other than the couple minor comments, everything looks good and I'm extremely impressed how well this all turned out. Removing the external tooling and scripts previously needed to build U-Boot for K3 is key to our upstream-first goals and long term support strategy. Thank you! For the whole series, Acked-by: Andrew Davis <[email protected]> [0] https://lists.denx.de/pipermail/u-boot/2023-April/514400.html
