On 3/28/23 09:21, Michal Simek wrote:
Fix model name, node locations and also add pinctrl description for usb.
Signed-off-by: Michal Simek <[email protected]>
---
---
arch/arm/dts/zynq-microzed.dts | 42 ++++++++++++++++++++++++++++------
1 file changed, 35 insertions(+), 7 deletions(-)
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts
index b95eb3ed2434..5f280f4d8ece 100644
--- a/arch/arm/dts/zynq-microzed.dts
+++ b/arch/arm/dts/zynq-microzed.dts
@@ -8,7 +8,7 @@
#include "zynq-7000.dtsi"
/ {
- model = "Zynq MicroZED Board";
+ model = "Avnet MicroZed board";
compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed",
"xlnx,zynq-7000";
aliases {
@@ -19,7 +19,7 @@
memory@0 {
device_type = "memory";
- reg = <0 0x40000000>;
+ reg = <0x0 0x40000000>;
};
chosen {
@@ -42,11 +42,6 @@
status = "okay";
};
-&uart1 {
- bootph-all;
- status = "okay";
-};
-
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
@@ -62,8 +57,41 @@
status = "okay";
};
+&uart1 {
+ bootph-all;
+ status = "okay";
+};
+
&usb0 {
status = "okay";
dr_mode = "host";
usb-phy = <&usb_phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&pinctrl0 {
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO29", "MIO31", "MIO36";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+ "MIO35", "MIO37", "MIO38", "MIO39";
+ bias-disable;
+ };
+ };
};
Applied.
M
