hi,

On 4/13/23 11:18, Kever Yang wrote:

On 2023/4/8 17:11, FUKAUMI Naoki wrote:
sync *.dts{,i} files for Radxa ROCK Pi 4 series with Linux 6.3-rc5.

Signed-off-by: FUKAUMI Naoki <[email protected]>
Reviewed-by: Kever Yang <[email protected]>

this is not merged yet, right?
I want to modify this change.

Best regards,

--
FUKAUMI Naoki

Thanks,
- Kever
---
  arch/arm/dts/Makefile                         |   2 +
  arch/arm/dts/rk3399-rock-pi-4.dtsi            | 229 ++++++++++++------
  .../dts/rk3399-rock-pi-4a-plus-u-boot.dtsi    |   5 +
  arch/arm/dts/rk3399-rock-pi-4a-plus.dts       |  25 ++
  arch/arm/dts/rk3399-rock-pi-4a-u-boot.dtsi    |   6 +
  .../dts/rk3399-rock-pi-4b-plus-u-boot.dtsi    |   5 +
  arch/arm/dts/rk3399-rock-pi-4b-plus.dts       |  61 +++++
  arch/arm/dts/rk3399-rock-pi-4b.dts            |   9 +-
  arch/arm/dts/rk3399-rock-pi-4c.dts            |  20 +-
  9 files changed, 284 insertions(+), 78 deletions(-)
  create mode 100644 arch/arm/dts/rk3399-rock-pi-4a-plus-u-boot.dtsi
  create mode 100644 arch/arm/dts/rk3399-rock-pi-4a-plus.dts
  create mode 100644 arch/arm/dts/rk3399-rock-pi-4a-u-boot.dtsi
  create mode 100644 arch/arm/dts/rk3399-rock-pi-4b-plus-u-boot.dtsi
  create mode 100644 arch/arm/dts/rk3399-rock-pi-4b-plus.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c160e884bf..8a5eb6225c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -157,7 +157,9 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
      rk3399-puma-haikou.dtb \
      rk3399-roc-pc.dtb \
      rk3399-roc-pc-mezzanine.dtb \
+    rk3399-rock-pi-4a-plus.dtb \
      rk3399-rock-pi-4a.dtb \
+    rk3399-rock-pi-4b-plus.dtb \
      rk3399-rock-pi-4b.dtb \
      rk3399-rock-pi-4c.dtb \
      rk3399-rock960.dtb \
diff --git a/arch/arm/dts/rk3399-rock-pi-4.dtsi b/arch/arm/dts/rk3399-rock-pi-4.dtsi
index b28888ea92..907071d4fe 100644
--- a/arch/arm/dts/rk3399-rock-pi-4.dtsi
+++ b/arch/arm/dts/rk3399-rock-pi-4.dtsi
@@ -6,14 +6,15 @@
  /dts-v1/;
  #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
  #include <dt-bindings/pwm/pwm.h>
  #include "rk3399.dtsi"
  #include "rk3399-opp.dtsi"
  / {
      aliases {
-        mmc0 = &sdmmc;
-        mmc1 = &sdhci;
+        mmc0 = &sdhci;
+        mmc1 = &sdmmc;
      };
      chosen {
@@ -27,6 +28,20 @@
          #clock-cells = <0>;
      };
+    leds {
+        compatible = "gpio-leds";
+        pinctrl-names = "default";
+        pinctrl-0 = <&user_led2>;
+
+        /* USER_LED2 */
+        led-0 {
+            function = LED_FUNCTION_STATUS;
+            color = <LED_COLOR_ID_BLUE>;
+            gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+            linux,default-trigger = "heartbeat";
+        };
+    };
+
      sdio_pwrseq: sdio-pwrseq {
          compatible = "mmc-pwrseq-simple";
          clocks = <&rk808 1>;
@@ -36,32 +51,56 @@
          reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
      };
-    vcc12v_dcin: dc-12v {
+    sound: sound {
+        compatible = "audio-graph-card";
+        label = "Analog";
+        dais = <&i2s0_p0>;
+    };
+
+    sound-dit {
+        compatible = "audio-graph-card";
+        label = "SPDIF";
+        dais = <&spdif_p0>;
+    };
+
+    spdif-dit {
+        compatible = "linux,spdif-dit";
+        #sound-dai-cells = <0>;
+
+        port {
+            dit_p0_0: endpoint {
+                remote-endpoint = <&spdif_p0_0>;
+            };
+        };
+    };
+
+    vbus_typec: vbus-typec-regulator {
          compatible = "regulator-fixed";
-        regulator-name = "vcc12v_dcin";
+        enable-active-high;
+        gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&vcc5v0_typec_en>;
+        regulator-name = "vbus_typec";
          regulator-always-on;
-        regulator-boot-on;
-        regulator-min-microvolt = <12000000>;
-        regulator-max-microvolt = <12000000>;
+        vin-supply = <&vcc5v0_sys>;
      };
-    vcc5v0_sys: vcc-sys {
+    vcc12v_dcin: dc-12v {
          compatible = "regulator-fixed";
-        regulator-name = "vcc5v0_sys";
+        regulator-name = "vcc12v_dcin";
          regulator-always-on;
          regulator-boot-on;
-        regulator-min-microvolt = <5000000>;
-        regulator-max-microvolt = <5000000>;
-        vin-supply = <&vcc12v_dcin>;
+        regulator-min-microvolt = <12000000>;
+        regulator-max-microvolt = <12000000>;
      };
-    vcc_0v9: vcc-0v9 {
+    vcc3v3_lan: vcc3v3-lan-regulator {
          compatible = "regulator-fixed";
-        regulator-name = "vcc_0v9";
+        regulator-name = "vcc3v3_lan";
          regulator-always-on;
          regulator-boot-on;
-        regulator-min-microvolt = <900000>;
-        regulator-max-microvolt = <900000>;
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
          vin-supply = <&vcc3v3_sys>;
      };
@@ -98,35 +137,35 @@
          vin-supply = <&vcc5v0_sys>;
      };
-    vcc5v0_typec: vcc5v0-typec-regulator {
+    vcc5v0_sys: vcc-sys {
          compatible = "regulator-fixed";
-        enable-active-high;
-        gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&vcc5v0_typec_en>;
-        regulator-name = "vcc5v0_typec";
+        regulator-name = "vcc5v0_sys";
          regulator-always-on;
-        vin-supply = <&vcc5v0_sys>;
+        regulator-boot-on;
+        regulator-min-microvolt = <5000000>;
+        regulator-max-microvolt = <5000000>;
+        vin-supply = <&vcc12v_dcin>;
      };
-    vcc_lan: vcc3v3-phy-regulator {
+    vcc_0v9: vcc-0v9 {
          compatible = "regulator-fixed";
-        regulator-name = "vcc_lan";
+        regulator-name = "vcc_0v9";
          regulator-always-on;
          regulator-boot-on;
-        regulator-min-microvolt = <3300000>;
-        regulator-max-microvolt = <3300000>;
+        regulator-min-microvolt = <900000>;
+        regulator-max-microvolt = <900000>;
+        vin-supply = <&vcc3v3_sys>;
      };
      vdd_log: vdd-log {
          compatible = "pwm-regulator";
          pwms = <&pwm2 0 25000 1>;
+        pwm-supply = <&vcc5v0_sys>;
          regulator-name = "vdd_log";
          regulator-always-on;
          regulator-boot-on;
          regulator-min-microvolt = <800000>;
          regulator-max-microvolt = <1400000>;
-        vin-supply = <&vcc5v0_sys>;
      };
  };
@@ -162,7 +201,7 @@
      assigned-clocks = <&cru SCLK_RMII_SRC>;
      assigned-clock-parents = <&clkin_gmac>;
      clock_in_out = "input";
-    phy-supply = <&vcc_lan>;
+    phy-supply = <&vcc3v3_lan>;
      phy-mode = "rgmii";
      pinctrl-names = "default";
      pinctrl-0 = <&rgmii_pins>;
@@ -180,6 +219,8 @@
  };
  &hdmi {
+    avdd-0v9-supply = <&vcca0v9_hdmi>;
+    avdd-1v8-supply = <&vcca1v8_hdmi>;
      ddc-i2c-bus = <&i2c3>;
      pinctrl-names = "default";
      pinctrl-0 = <&hdmi_cec>;
@@ -267,8 +308,8 @@
                  };
              };
-            vcc1v8_codec: LDO_REG1 {
-                regulator-name = "vcc1v8_codec";
+            vcca1v8_codec: LDO_REG1 {
+                regulator-name = "vcca1v8_codec";
                  regulator-always-on;
                  regulator-boot-on;
                  regulator-min-microvolt = <1800000>;
@@ -278,8 +319,8 @@
                  };
              };
-            vcc1v8_hdmi: LDO_REG2 {
-                regulator-name = "vcc1v8_hdmi";
+            vcca1v8_hdmi: LDO_REG2 {
+                regulator-name = "vcca1v8_hdmi";
                  regulator-always-on;
                  regulator-boot-on;
                  regulator-min-microvolt = <1800000>;
@@ -336,8 +377,8 @@
                  };
              };
-            vcc0v9_hdmi: LDO_REG7 {
-                regulator-name = "vcc0v9_hdmi";
+            vcca0v9_hdmi: LDO_REG7 {
+                regulator-name = "vcca0v9_hdmi";
                  regulator-always-on;
                  regulator-boot-on;
                  regulator-min-microvolt = <900000>;
@@ -422,6 +463,20 @@
      i2c-scl-rising-time-ns = <300>;
      i2c-scl-falling-time-ns = <15>;
      status = "okay";
+
+    es8316: codec@11 {
+        compatible = "everest,es8316";
+        reg = <0x11>;
+        clocks = <&cru SCLK_I2S_8CH_OUT>;
+        clock-names = "mclk";
+        #sound-dai-cells = <0>;
+
+        port {
+            es8316_p0_0: endpoint {
+                remote-endpoint = <&i2s0_p0_0>;
+            };
+        };
+    };
  };
  &i2c3 {
@@ -441,12 +496,19 @@
      rockchip,capture-channels = <2>;
      rockchip,playback-channels = <2>;
      status = "okay";
+
+    i2s0_p0: port {
+        i2s0_p0_0: endpoint {
+            dai-format = "i2s";
+            mclk-fs = <256>;
+            remote-endpoint = <&es8316_p0_0>;
+        };
+    };
  };
  &i2s1 {
      rockchip,playback-channels = <2>;
      rockchip,capture-channels = <2>;
-    status = "okay";
  };
  &i2s2 {
@@ -454,21 +516,10 @@
  };
  &io_domains {
-    status = "okay";
-
+    audio-supply = <&vcca1v8_codec>;
      bt656-supply = <&vcc_3v0>;
-    audio-supply = <&vcc_3v0>;
-    sdmmc-supply = <&vcc_sdio>;
      gpio1830-supply = <&vcc_3v0>;
-};
-
-&pmu_io_domains {
-    status = "okay";
-
-    pmu1830-supply = <&vcc_3v0>;
-};
-
-&pcie_phy {
+    sdmmc-supply = <&vcc_sdio>;
      status = "okay";
  };
@@ -483,6 +534,10 @@
      status = "okay";
  };
+&pcie_phy {
+    status = "okay";
+};
+
  &pinctrl {
      bt {
          bt_enable_h: bt-enable-h {
@@ -498,26 +553,25 @@
          };
      };
-    pcie {
-        pcie_pwr_en: pcie-pwr-en {
-            rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+    es8316 {
+        hp_detect: hp-detect {
+            rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
          };
-    };
-    sdio0 {
-        sdio0_bus4: sdio0-bus4 {
-            rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>,
-                    <2 RK_PC5 1 &pcfg_pull_up_20ma>,
-                    <2 RK_PC6 1 &pcfg_pull_up_20ma>,
-                    <2 RK_PC7 1 &pcfg_pull_up_20ma>;
+        hp_int: hp-int {
+            rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
          };
+    };
-        sdio0_cmd: sdio0-cmd {
-            rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>;
+    leds {
+        user_led2: user-led2 {
+            rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
          };
+    };
-        sdio0_clk: sdio0-clk {
-            rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>;
+    pcie {
+        pcie_pwr_en: pcie-pwr-en {
+            rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
          };
      };
@@ -535,6 +589,23 @@
          };
      };
+    sdio0 {
+        sdio0_bus4: sdio0-bus4 {
+            rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>,
+                    <2 RK_PC5 1 &pcfg_pull_up_20ma>,
+                    <2 RK_PC6 1 &pcfg_pull_up_20ma>,
+                    <2 RK_PC7 1 &pcfg_pull_up_20ma>;
+        };
+
+        sdio0_cmd: sdio0-cmd {
+            rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>;
+        };
+
+        sdio0_clk: sdio0-clk {
+            rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>;
+        };
+    };
+
      usb-typec {
          vcc5v0_typec_en: vcc5v0-typec-en {
              rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -558,6 +629,11 @@
      };
  };
+&pmu_io_domains {
+    pmu1830-supply = <&vcc_3v0>;
+    status = "okay";
+};
+
  &pwm2 {
      status = "okay";
  };
@@ -568,6 +644,14 @@
      vref-supply = <&vcc_1v8>;
  };
+&sdhci {
+    bus-width = <8>;
+    mmc-hs400-1_8v;
+    mmc-hs400-enhanced-strobe;
+    non-removable;
+    status = "okay";
+};
+
  &sdio0 {
      #address-cells = <1>;
      #size-cells = <0>;
@@ -595,12 +679,13 @@
      status = "okay";
  };
-&sdhci {
-    bus-width = <8>;
-    mmc-hs400-1_8v;
-    mmc-hs400-enhanced-strobe;
-    non-removable;
-    status = "okay";
+&spdif {
+
+    spdif_p0: port {
+        spdif_p0_0: endpoint {
+            remote-endpoint = <&dit_p0_0>;
+        };
+    };
  };
  &tcphy0 {
@@ -675,13 +760,13 @@
      status = "okay";
  };
-&usbdrd_dwc3_0 {
+&usbdrd3_1 {
      status = "okay";
-    dr_mode = "host";
  };
-&usbdrd3_1 {
+&usbdrd_dwc3_0 {
      status = "okay";
+    dr_mode = "host";
  };
  &usbdrd_dwc3_1 {
diff --git a/arch/arm/dts/rk3399-rock-pi-4a-plus-u-boot.dtsi b/arch/arm/dts/rk3399-rock-pi-4a-plus-u-boot.dtsi
new file mode 100644
index 0000000000..5c1c451b8f
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4a-plus-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Radxa Limited
+ */
+#include "rk3399-rock-pi-4-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-rock-pi-4a-plus.dts b/arch/arm/dts/rk3399-rock-pi-4a-plus.dts
new file mode 100644
index 0000000000..f5a68d8d07
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4a-plus.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <[email protected]>
+ * Copyright (c) 2019 Pragnesh Patel <[email protected]>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-op1-opp.dtsi"
+
+/ {
+    model = "Radxa ROCK Pi 4A+";
+    compatible = "radxa,rockpi4a-plus", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&es8316 {
+    pinctrl-0 = <&hp_detect &hp_int>;
+    pinctrl-names = "default";
+    interrupt-parent = <&gpio1>;
+    interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sound {
+    hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/dts/rk3399-rock-pi-4a-u-boot.dtsi b/arch/arm/dts/rk3399-rock-pi-4a-u-boot.dtsi
new file mode 100644
index 0000000000..85ee5770ad
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4a-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <[email protected]>
+ */
+
+#include "rk3399-rock-pi-4-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-rock-pi-4b-plus-u-boot.dtsi b/arch/arm/dts/rk3399-rock-pi-4b-plus-u-boot.dtsi
new file mode 100644
index 0000000000..5c1c451b8f
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4b-plus-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Radxa Limited
+ */
+#include "rk3399-rock-pi-4-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-rock-pi-4b-plus.dts b/arch/arm/dts/rk3399-rock-pi-4b-plus.dts
new file mode 100644
index 0000000000..cec3b7b1b9
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4b-plus.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <[email protected]>
+ * Copyright (c) 2019 Pragnesh Patel <[email protected]>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-op1-opp.dtsi"
+
+/ {
+    model = "Radxa ROCK Pi 4B+";
+    compatible = "radxa,rockpi4b-plus", "radxa,rockpi4", "rockchip,rk3399";
+
+    aliases {
+        mmc2 = &sdio0;
+    };
+};
+
+&es8316 {
+    pinctrl-0 = <&hp_detect &hp_int>;
+    pinctrl-names = "default";
+    interrupt-parent = <&gpio1>;
+    interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdio0 {
+    status = "okay";
+
+    brcmf: wifi@1 {
+        compatible = "brcm,bcm4329-fmac";
+        reg = <1>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+        interrupt-names = "host-wake";
+        pinctrl-names = "default";
+        pinctrl-0 = <&wifi_host_wake_l>;
+    };
+};
+
+&sound {
+    hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
+&uart0 {
+    status = "okay";
+
+    bluetooth {
+        compatible = "brcm,bcm4345c5";
+        clocks = <&rk808 1>;
+        clock-names = "lpo";
+        device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+        host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+        shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+        max-speed = <1500000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+        vbat-supply = <&vcc3v3_sys>;
+        vddio-supply = <&vcc_1v8>;
+    };
+};
diff --git a/arch/arm/dts/rk3399-rock-pi-4b.dts b/arch/arm/dts/rk3399-rock-pi-4b.dts
index 6c63e61706..0806545922 100644
--- a/arch/arm/dts/rk3399-rock-pi-4b.dts
+++ b/arch/arm/dts/rk3399-rock-pi-4b.dts
@@ -23,7 +23,7 @@
          compatible = "brcm,bcm4329-fmac";
          reg = <1>;
          interrupt-parent = <&gpio0>;
-        interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+        interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
          interrupt-names = "host-wake";
          pinctrl-names = "default";
          pinctrl-0 = <&wifi_host_wake_l>;
@@ -34,13 +34,16 @@
      status = "okay";
      bluetooth {
-        compatible = "brcm,bcm43438-bt";
+        compatible = "brcm,bcm4345c5";
          clocks = <&rk808 1>;
-        clock-names = "ext_clock";
+        clock-names = "lpo";
          device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
          host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
          shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+        max-speed = <1500000>;
          pinctrl-names = "default";
          pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+        vbat-supply = <&vcc3v3_sys>;
+        vddio-supply = <&vcc_1v8>;
      };
  };
diff --git a/arch/arm/dts/rk3399-rock-pi-4c.dts b/arch/arm/dts/rk3399-rock-pi-4c.dts
index 99169bcd51..4053ba7261 100644
--- a/arch/arm/dts/rk3399-rock-pi-4c.dts
+++ b/arch/arm/dts/rk3399-rock-pi-4c.dts
@@ -17,6 +17,13 @@
      };
  };
+&es8316 {
+    pinctrl-0 = <&hp_detect &hp_int>;
+    pinctrl-names = "default";
+    interrupt-parent = <&gpio1>;
+    interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
  &sdio0 {
      status = "okay";
@@ -24,25 +31,32 @@
          compatible = "brcm,bcm4329-fmac";
          reg = <1>;
          interrupt-parent = <&gpio0>;
-        interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+        interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
          interrupt-names = "host-wake";
          pinctrl-names = "default";
          pinctrl-0 = <&wifi_host_wake_l>;
      };
  };
+&sound {
+    hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
  &uart0 {
      status = "okay";
      bluetooth {
-        compatible = "brcm,bcm43438-bt";
+        compatible = "brcm,bcm4345c5";
          clocks = <&rk808 1>;
-        clock-names = "ext_clock";
+        clock-names = "lpo";
          device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
          host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
          shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+        max-speed = <1500000>;
          pinctrl-names = "default";
          pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+        vbat-supply = <&vcc3v3_sys>;
+        vddio-supply = <&vcc_1v8>;
      };
  };

Reply via email to