On 4/26/23 9:13 AM, Kumar, Udit wrote:
Hi Neha,
On 4/26/2023 5:31 PM, Neha Malcom Francis wrote:
Hi Udit
On 26/04/23 16:09, Kumar, Udit wrote:
Hi Neha,
Hi Udit,
[..]
I do have a general doubt; why do we have only atf-sram sub-node in
msmc_sram in all other devices (j721e, j7200 and am65) except j721s2?
let me know, which source code you are referring to
In U-Boot, for j721e, j7200 and am65; they *only* contain atf-sram?
For u-boot please see
https://elixir.bootlin.com/u-boot/latest/source/arch/arm/dts/k3-j721s2-main.dtsi#L16
I could see for j721s2 as well, in uboot[0] and Linux[1]
[..]
What I mean to ask is, why aren't there tifs or l3cache subnodes in j721e,
j7200 and am65?
I think, above platform is doing in right way,
AFAIK, if we have to provide then we can provide size of this.
l3-cache can not be addressable.
So the history here is we used to have the SRAM node in DT sized
to the actual size in hardware. L3 cache size can be set at boot
time (in SYSFW board-config file), and that uses up some of the
SRAM, so the end address moves in. We could represent this as
a reserved node inside the full SRAM node, or by shrinking the
SRAM node and hiding this. Same story for TIFS and ATF, they
use some variable amount of the end of SRAM.
I'd prefer being explicit and keep these nodes.
Andrew
But in any case, u-boot removes this code before passing to OS.
https://elixir.bootlin.com/u-boot/latest/source/arch/arm/mach-k3/common.c#L354
Thanking You
Neha Malcom Francis
