On 5/2/23 14:50, Stefan Herbrechtsmeier wrote:
From: Stefan Herbrechtsmeier <[email protected]>
Request the reset gpio of the rgmii-id phy as output to be consistent
with the eth-phy-uclass driver.
Signed-off-by: Stefan Herbrechtsmeier <[email protected]>
---
drivers/net/phy/ethernet_id.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/ethernet_id.c b/drivers/net/phy/ethernet_id.c
index 8864f99bb3..a715e83db9 100644
--- a/drivers/net/phy/ethernet_id.c
+++ b/drivers/net/phy/ethernet_id.c
@@ -39,7 +39,7 @@ struct phy_device *phy_connect_phy_id(struct mii_dev *bus,
struct udevice *dev,
if (!IS_ENABLED(CONFIG_DM_ETH_PHY)) {
ret = gpio_request_by_name_nodev(node, "reset-gpios", 0, &gpio,
- GPIOD_ACTIVE_LOW);
+ GPIOD_IS_OUT |
GPIOD_ACTIVE_LOW);
if (!ret) {
assert = ofnode_read_u32_default(node,
"reset-assert-us", 0);
Reviewed-by: Michal Simek <[email protected]>
M
