To avoid piling up all the various Kconfig symbols in one place, i.e. common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ . This commit moves SPL_USB_STORAGE and matching SYS_USB_FAT_BOOT_PARTITION .
Signed-off-by: Marek Vasut <[email protected]> --- Cc: Andrew Davis <[email protected]> Cc: Chris Packham <[email protected]> Cc: Jim Liu <[email protected]> Cc: Lukasz Majewski <[email protected]> Cc: Samuel Holland <[email protected]> Cc: Simon Glass <[email protected]> Cc: Stefan Roese <[email protected]> Cc: Tom Rini <[email protected]> Cc: Weijie Gao <[email protected]> --- common/spl/Kconfig | 17 ----------------- drivers/usb/Kconfig | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 17 deletions(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 03d0fd90e09..5ad29af21cb 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1345,23 +1345,6 @@ config SPL_THERMAL automatic power-off when the temperature gets too high or low. Other devices may be discrete but connected on a suitable bus. -config SPL_USB_STORAGE - bool "Support loading from USB" - depends on SPL_USB_HOST - help - Enable support for USB devices in SPL. This allows use of USB - devices such as hard drives and flash drivers for loading U-Boot. - The actual drivers are enabled separately using the normal U-Boot - config options. This enables loading from USB using a configured - device. - -config SYS_USB_FAT_BOOT_PARTITION - int "Partition on USB to use to load U-Boot from" - depends on SPL_USB_STORAGE - default 1 - help - Partition on the USB storage device to load U-Boot from - config SPL_USB_GADGET bool "Suppport USB Gadget drivers" help diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 94fb32d107c..a972d87c7ad 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -126,6 +126,28 @@ config USB_HUB_DEBOUNCE_TIMEOUT value = 1s because some usb device needs around 1.5s to be initialized and a 2s value should solve detection issue on problematic USB keys. +if SPL_USB_HOST + +comment "USB peripherals in SPL" + +config SPL_USB_STORAGE + bool "Support loading from USB" + help + Enable support for USB devices in SPL. This allows use of USB + devices such as hard drives and flash drivers for loading U-Boot. + The actual drivers are enabled separately using the normal U-Boot + config options. This enables loading from USB using a configured + device. + +config SYS_USB_FAT_BOOT_PARTITION + int "Partition on USB to use to load U-Boot from" + depends on SPL_USB_STORAGE + default 1 + help + Partition on the USB storage device to load U-Boot from. + +endif + if USB_KEYBOARD config USB_KEYBOARD_FN_KEYS -- 2.39.2
