On 05/05/2023 15:13, Ravi Gunasekaran wrote:
> From: Aswath Govindraju <a-govindr...@ti.com>
>
> When the device port is in a low power state [U3/L2/Not Connected],
> accesses to usb device registers may take a long time. This could lead to
> potential core hang when the controller registers are accessed after the
> port is disabled by setting DEVDS field. Setting the fast register access
> bit ensures that the PHY clock is keeping up in active state.
>
> Therefore, set fast access bit to ensure the accesses to device registers
> are quick even in low power states.
>
> Signed-off-by: Aswath Govindraju <a-govindr...@ti.com>
Reviewed-by: Roger Quadros <rog...@kernel.org>
