[PATCH] i2c: rockchip: De-initialize the bus after start bit failure

[Ondřej Jirman]

From: Ondrej Jirman <m...@xff.cz>

Failure can happen when i2c is used without initializing pinctrl properly,
which U-Boot happily allows in SPL. Without this fix, further I2C access would
fail, even after proper pinctrl initialization.

Signed-off-by: Ondrej Jirman <m...@xff.cz>
Cc: Heiko Schocher <h...@denx.de>
---
 drivers/i2c/rk_i2c.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/rk_i2c.c b/drivers/i2c/rk_i2c.c
index f8fac45b6ca0..9927af94a80b 100644
--- a/drivers/i2c/rk_i2c.c
+++ b/drivers/i2c/rk_i2c.c
@@ -342,7 +342,7 @@ static int rockchip_i2c_xfer(struct udevice *bus, struct 
i2c_msg *msg,
                             int nmsgs)
 {
        struct rk_i2c *i2c = dev_get_priv(bus);
-       int ret;
+       int ret = 0;
 
        debug("i2c_xfer: %d messages\n", nmsgs);
        for (; nmsgs > 0; nmsgs--, msg++) {
@@ -356,14 +356,15 @@ static int rockchip_i2c_xfer(struct udevice *bus, struct 
i2c_msg *msg,
                }
                if (ret) {
                        debug("i2c_write: error sending\n");
-                       return -EREMOTEIO;
+                       ret = -EREMOTEIO;
+                       break;
                }
        }
 
        rk_i2c_send_stop_bit(i2c);
        rk_i2c_disable(i2c);
 
-       return 0;
+       return ret;
 }
 
 int rockchip_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
-- 
2.40.1