From: Ondrej Jirman <m...@xff.cz>
This fixes access to camera sensor over I2C during probe time in
the kernel. (Kernel will fix I/0 port voltage by itself, but the
timing depends on probe order of the drivers, so the fix can
come after the camera sensor driver already failed to probe.)
Signed-off-by: Ondrej Jirman <m...@xff.cz>
Cc: Kever Yang <kever.y...@rock-chips.com>
---
board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
index eb639cd0d070..b6ccbb9c1c4b 100644
--- a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
+++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
@@ -15,7 +15,8 @@
#include <asm/arch-rockchip/misc.h>
#include <power/regulator.h>
-#define GRF_IO_VSEL_BT565_SHIFT 0
+#define GRF_IO_VSEL_BT565_GPIO2AB 1
+#define GRF_IO_VSEL_AUDIO_GPIO3D4A 2
#define PMUGRF_CON0_VSEL_SHIFT 8
#ifndef CONFIG_SPL_BUILD
@@ -48,7 +49,8 @@ static void setup_iodomain(void)
syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
/* BT565 is in 1.8v domain */
- rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
+ rk_setreg(&grf->io_vsel,
+ GRF_IO_VSEL_BT565_GPIO2AB | GRF_IO_VSEL_AUDIO_GPIO3D4A);
/* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
--
2.40.1
