Add a Kconfig for OPTEE_LOAD_ADDRESS which adds tee.bin to the
imx8m{m,n,p} FIT image.Prior to using binman for image creation the presense of tee.bin in the directory would cause mkimage_fit_atf.sh to add the tee.bin node to the FIT image. Once boards moved away from using CONFIG_SPL_FIT_GENERATOR this was lost. This patch restores that functionality. A Kconfig option is added due to binman not being able to utilize env variables. Signed-off-by: Tim Harvey <[email protected]> --- arch/arm/dts/imx8mm-u-boot.dtsi | 19 +++++++++++++++++++ arch/arm/dts/imx8mn-u-boot.dtsi | 19 +++++++++++++++++++ arch/arm/dts/imx8mp-u-boot.dtsi | 19 +++++++++++++++++++ drivers/tee/optee/Kconfig | 7 +++++++ 4 files changed, 64 insertions(+) diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi index a843bb851eaf..61f907a4743b 100644 --- a/arch/arm/dts/imx8mm-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-u-boot.dtsi @@ -124,6 +124,21 @@ type = "atf-bl31"; }; }; + +#ifdef CONFIG_OPTEE_LOAD_ADDRESS + tee { + description = "TEE firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_OPTEE_LOAD_ADDRESS>; + entry = <CONFIG_OPTEE_LOAD_ADDRESS>; + + tee_blob: blob-ext { + filename = "tee.bin"; + }; + }; +#endif #endif binman_fip: fip { @@ -154,7 +169,11 @@ fdt = "fdt-SEQ"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI +#ifdef CONFIG_OPTEE_LOAD_ADDRESS + loadables = "atf", "tee"; +#else loadables = "atf"; +#endif #endif }; }; diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi index 86c9a6cd67f0..15cec4ffab44 100644 --- a/arch/arm/dts/imx8mn-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-u-boot.dtsi @@ -181,6 +181,21 @@ type = "atf-bl31"; }; }; + +#ifdef CONFIG_OPTEE_LOAD_ADDRESS + tee { + description = "TEE firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_OPTEE_LOAD_ADDRESS>; + entry = <CONFIG_OPTEE_LOAD_ADDRESS>; + + tee_blob: blob-ext { + filename = "tee.bin"; + }; + }; +#endif #endif binman_fip: fip { @@ -211,7 +226,11 @@ fdt = "fdt-SEQ"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI +#ifdef CONFIG_OPTEE_LOAD_ADDRESS + loadables = "atf", "tee"; +#else loadables = "atf"; +#endif #endif }; }; diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi index 8c9d6412ccb5..b46fc7eeed0d 100644 --- a/arch/arm/dts/imx8mp-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-u-boot.dtsi @@ -145,6 +145,21 @@ type = "atf-bl31"; }; }; + +#ifdef CONFIG_OPTEE_LOAD_ADDRESS + tee { + description = "TEE firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_OPTEE_LOAD_ADDRESS>; + entry = <CONFIG_OPTEE_LOAD_ADDRESS>; + + tee_blob: blob-ext { + filename = "tee.bin"; + }; + }; +#endif #endif @fdt-SEQ { @@ -166,7 +181,11 @@ fdt = "fdt-SEQ"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI +#ifdef CONFIG_OPTEE_LOAD_ADDRESS + loadables = "atf", "tee"; +#else loadables = "atf"; +#endif #endif }; }; diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig index 9dc65b0501e2..09a8bbd2fafd 100644 --- a/drivers/tee/optee/Kconfig +++ b/drivers/tee/optee/Kconfig @@ -14,6 +14,13 @@ if OPTEE || SANDBOX menu "OP-TEE options" +config OPTEE_LOAD_ADDRESS + hex "Load address of OPTEE" + help + Defines the load and entry address used by U-Boot FIT images + for tee.bin. This address must match the link address that + tee.bin was built with. + config OPTEE_TA_AVB bool "Support AVB TA" default y -- 2.25.1
