use new memory layout and change uboot load address.
open tpm, tee and more config feature
No need to reserve top memory because the reserved space
is moved to the bottom area of memory.
Signed-off-by: Jim Liu <jjl...@nuvoton.com>
---
board/nuvoton/arbel_evb/Kconfig | 4 ++--
configs/arbel_evb_defconfig | 15 ++++++++++++++-
include/configs/arbel.h | 5 +++--
3 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/board/nuvoton/arbel_evb/Kconfig b/board/nuvoton/arbel_evb/Kconfig
index efe85974a2..33c589f1fb 100644
--- a/board/nuvoton/arbel_evb/Kconfig
+++ b/board/nuvoton/arbel_evb/Kconfig
@@ -11,8 +11,8 @@ config SYS_CONFIG_NAME
config SYS_MEM_TOP_HIDE
hex "Reserved TOP memory"
- default 0xB000000
+ default 0x0
help
- Reserve memory for ECC/GFX/VCD/ECE.
+ Reserve memory for ECC/GFX/OPTEE/TIP/CP.
endif
diff --git a/configs/arbel_evb_defconfig b/configs/arbel_evb_defconfig
index 29c4c187b5..c27a7cdd3a 100644
--- a/configs/arbel_evb_defconfig
+++ b/configs/arbel_evb_defconfig
@@ -2,7 +2,8 @@ CONFIG_ARM=y
CONFIG_ARCH_NPCM=y
CONFIG_SYS_MALLOC_LEN=0x240000
CONFIG_SYS_MALLOC_F_LEN=0x1000
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_TEXT_BASE=0x06208000
+CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x3C0000
CONFIG_ENV_SECT_SIZE=0x1000
@@ -22,6 +23,8 @@ CONFIG_BOOTCOMMAND="run common_bootargs; run romboot"
CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_BOOTM_LEN=0x1400000
+CONFIG_SYS_LOAD_ADDR=0x06208000
+CONFIG_SYS_INIT_SP_ADDR=0x06208000
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
@@ -86,3 +89,13 @@ CONFIG_USB_STORAGE=y
CONFIG_LIB_HW_RAND=y
CONFIG_SHA_HW_ACCEL=y
# CONFIG_EFI_LOADER is not set
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+CONFIG_TPM=y
+CONFIG_TPM_V2=y
+CONFIG_TPM2_FTPM_TEE=y
+CONFIG_CMD_TPM=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_PART=y
diff --git a/include/configs/arbel.h b/include/configs/arbel.h
index 8e27fb52a1..891257bc93 100644
--- a/include/configs/arbel.h
+++ b/include/configs/arbel.h
@@ -7,12 +7,13 @@
#define __CONFIG_ARBEL_H
#define CFG_SYS_SDRAM_BASE 0x0
-#define CFG_SYS_BOOTMAPSZ (20 << 20)
+#define CFG_SYS_BOOTMAPSZ (30 << 20)
+#define CFG_SYS_BOOTM_LEN (20 << 20)
#define CFG_SYS_INIT_RAM_ADDR CFG_SYS_SDRAM_BASE
#define CFG_SYS_INIT_RAM_SIZE 0x8000
/* Default environemnt variables */
-#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \
+#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80400000\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
--
2.17.1
