Device tree alignment with Linux kernel v6.4.
Signed-off-by: Patrick Delaunay <[email protected]>
---
arch/arm/dts/stm32mp13-pinctrl.dtsi | 129 ++++++++++++++++++++++++++++
arch/arm/dts/stm32mp131.dtsi | 99 ++++++++++++++++++++-
arch/arm/dts/stm32mp135f-dk.dts | 42 ++++++++-
arch/arm/dts/stm32mp15-pinctrl.dtsi | 34 ++++----
arch/arm/dts/stm32mp151.dtsi | 4 +-
arch/arm/dts/stm32mp157a-dk1.dts | 3 -
arch/arm/dts/stm32mp157c-dk2.dts | 3 -
arch/arm/dts/stm32mp157c-ed1.dts | 17 +---
arch/arm/dts/stm32mp157c-ev1.dts | 9 +-
arch/arm/dts/stm32mp15xx-dkx.dtsi | 15 ++--
10 files changed, 299 insertions(+), 56 deletions(-)
diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi
b/arch/arm/dts/stm32mp13-pinctrl.dtsi
index b2dce3a29f39..27e0c3826789 100644
--- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
@@ -258,4 +258,133 @@
bias-disable;
};
};
+
+ uart4_idle_pins_a: uart4-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart4_sleep_pins_a: uart4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */
+ };
+ };
+
+ uart8_pins_a: uart8-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+ bias-pull-up;
+ };
+ };
+
+ uart8_idle_pins_a: uart8-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+ bias-pull-up;
+ };
+ };
+
+ uart8_sleep_pins_a: uart8-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */
+ <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */
+ };
+ };
+
+ usart1_pins_a: usart1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
+ <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */
+ <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS
*/
+ bias-pull-up;
+ };
+ };
+
+ usart1_idle_pins_a: usart1-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+ <STM32_PINMUX('A', 7, ANALOG)>; /*
USART1_CTS_NSS */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */
+ bias-pull-up;
+ };
+ };
+
+ usart1_sleep_pins_a: usart1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS
*/
+ <STM32_PINMUX('A', 7, ANALOG)>, /*
USART1_CTS_NSS */
+ <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */
+ };
+ };
+
+ usart2_pins_a: usart2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */
+ <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */
+ <STM32_PINMUX('E', 11, AF2)>; /*
USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart2_idle_pins_a: usart2-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX
*/
+ <STM32_PINMUX('E', 11, ANALOG)>; /*
USART2_CTS_NSS */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */
+ bias-disable;
+ };
+ };
+
+ usart2_sleep_pins_a: usart2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX
*/
+ <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS
*/
+ <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX
*/
+ <STM32_PINMUX('E', 11, ANALOG)>; /*
USART2_CTS_NSS */
+ };
+ };
};
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
index d94ba2547267..d163c267e34c 100644
--- a/arch/arm/dts/stm32mp131.dtsi
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -397,12 +397,42 @@
status = "disabled";
};
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ resets = <&rcc USART3_R>;
+ wakeup-source;
+ dmas = <&dmamux1 45 0x400 0x5>,
+ <&dmamux1 46 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
uart4: serial@40010000 {
compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART4_K>;
resets = <&rcc UART4_R>;
+ wakeup-source;
+ dmas = <&dmamux1 63 0x400 0x5>,
+ <&dmamux1 64 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ resets = <&rcc UART5_R>;
+ wakeup-source;
+ dmas = <&dmamux1 65 0x400 0x5>,
+ <&dmamux1 66 0x400 0x1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -442,6 +472,32 @@
status = "disabled";
};
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ resets = <&rcc UART7_R>;
+ wakeup-source;
+ dmas = <&dmamux1 79 0x400 0x5>,
+ <&dmamux1 80 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ resets = <&rcc UART8_R>;
+ wakeup-source;
+ dmas = <&dmamux1 81 0x400 0x5>,
+ <&dmamux1 82 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
timers1: timer@44000000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -524,6 +580,19 @@
};
};
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ resets = <&rcc USART6_R>;
+ wakeup-source;
+ dmas = <&dmamux1 71 0x400 0x5>,
+ <&dmamux1 72 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
i2s1: audio-controller@44004000 {
compatible = "st,stm32h7-i2s";
reg = <0x44004000 0x400>;
@@ -748,6 +817,32 @@
status = "disabled";
};
+ usart1: serial@4c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ wakeup-source;
+ dmas = <&dmamux1 41 0x400 0x5>,
+ <&dmamux1 42 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usart2: serial@4c001000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x5>,
+ <&dmamux1 44 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
i2s4: audio-controller@4c002000 {
compatible = "st,stm32h7-i2s";
reg = <0x4c002000 0x400>;
@@ -1001,8 +1096,6 @@
reg = <0x50000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-
clock-names = "hse", "hsi", "csi", "lse", "lsi";
clocks = <&scmi_clk CK_SCMI_HSE>,
<&scmi_clk CK_SCMI_HSI>,
diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts
index c40686cb2b9a..f0900ca672b5 100644
--- a/arch/arm/dts/stm32mp135f-dk.dts
+++ b/arch/arm/dts/stm32mp135f-dk.dts
@@ -19,6 +19,13 @@
aliases {
serial0 = &uart4;
+ serial1 = &usart1;
+ serial2 = &uart8;
+ serial3 = &usart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
};
memory@c0000000 {
@@ -267,8 +274,41 @@
};
&uart4 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&uart8 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart8_pins_a>;
+ pinctrl-1 = <&uart8_sleep_pins_a>;
+ pinctrl-2 = <&uart8_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+};
+
+&usart1 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&usart1_pins_a>;
+ pinctrl-1 = <&usart1_sleep_pins_a>;
+ pinctrl-2 = <&usart1_idle_pins_a>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
+/* Bluetooth */
+&usart2 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&usart2_pins_a>;
+ pinctrl-1 = <&usart2_sleep_pins_a>;
+ pinctrl-2 = <&usart2_idle_pins_a>;
+ uart-has-rtscts;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi
b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index a9d2bec99014..e86d989dd351 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1880,6 +1880,21 @@
};
};
+ spi1_pins_b: spi1-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+ <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+ bias-disable;
+ };
+ };
+
spi2_pins_a: spi2-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
@@ -2163,7 +2178,7 @@
<STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
bias-disable;
drive-push-pull;
- slew-rate = <3>;
+ slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
@@ -2181,7 +2196,7 @@
pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
bias-disable;
drive-push-pull;
- slew-rate = <3>;
+ slew-rate = <0>;
};
pins3 {
pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
@@ -2448,19 +2463,4 @@
bias-disable;
};
};
-
- spi1_pins_b: spi1-1 {
- pins1 {
- pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
- <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
-
- pins2 {
- pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
- bias-disable;
- };
- };
};
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index b3baacbb2694..21d11be328c0 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -1148,8 +1148,8 @@
usbotg_hs: usb-otg@49000000 {
compatible = "st,stm32mp15-hsotg", "snps,dwc2";
reg = <0x49000000 0x10000>;
- clocks = <&rcc USBO_K>;
- clock-names = "otg";
+ clocks = <&rcc USBO_K>, <&usbphyc>;
+ clock-names = "otg", "utmi";
resets = <&rcc USBO_R>;
reset-names = "dwc2";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
index 4c8be9c8eb20..0da3667ab1e0 100644
--- a/arch/arm/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/dts/stm32mp157a-dk1.dts
@@ -17,9 +17,6 @@
aliases {
ethernet0 = ðernet0;
- serial0 = &uart4;
- serial1 = &usart3;
- serial2 = &uart7;
};
chosen {
diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts
index 2bc92ef3aeb9..ab13e340f4ef 100644
--- a/arch/arm/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/dts/stm32mp157c-dk2.dts
@@ -18,9 +18,6 @@
aliases {
ethernet0 = ðernet0;
- serial0 = &uart4;
- serial1 = &usart3;
- serial2 = &uart7;
serial3 = &usart2;
};
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index fe5c8f25cecd..3541a17dceb9 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -16,6 +16,10 @@
model = "STMicroelectronics STM32MP157C eval daughter";
compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+ aliases {
+ serial0 = &uart4;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -65,15 +69,6 @@
reg = <0x38000000 0x10000>;
no-map;
};
-
- gpu_reserved: gpu@e8000000 {
- reg = <0xe8000000 0x8000000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &uart4;
};
sd_switch: regulator-sd_switch {
@@ -148,10 +143,6 @@
status = "okay";
};
-&gpu {
- contiguous-area = <&gpu_reserved>;
-};
-
&hash1 {
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index 542226cfcfdf..ba8e9d9a42fa 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -14,16 +14,15 @@
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
"st,stm32mp157";
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
aliases {
- serial0 = &uart4;
serial1 = &usart3;
ethernet0 = ðernet0;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
clocks {
clk_ext_camera: clk-ext-camera {
#clock-cells = <0>;
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi
b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 49b3e768c898..f4de6c0b7587 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -8,6 +8,12 @@
#include <dt-bindings/mfd/st,stpmic1.h>
/ {
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart3;
+ serial2 = &uart7;
+ };
+
memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x20000000>;
@@ -53,11 +59,6 @@
reg = <0x38000000 0x10000>;
no-map;
};
-
- gpu_reserved: gpu@d4000000 {
- reg = <0xd4000000 0x4000000>;
- no-map;
- };
};
led {
@@ -159,10 +160,6 @@
};
};
-&gpu {
- contiguous-area = <&gpu_reserved>;
-};
-
&hash1 {
status = "okay";
};
--
2.25.1
