From: Harini Katakam <[email protected]> Increase reset assert time for TI SGMII PHY on KR260 CC starting 6.1 kernel. This PHY does not come out of reset with the existing 100us pulse width as per testing on multiple carrier cards. The reset is driven via a PCA9570 I2C expander. The expander driver was updated to an upstream version in 6.1 where gpio_chip _set was optimized. Delays in earlier kernels may have masked this issue. This is a safe workaround value for assert pulse width before the discussions are resolved with TI.
Signed-off-by: Harini Katakam <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: Michal Simek <[email protected]> --- arch/arm/dts/zynqmp-sck-kr-g-revA.dts | 2 +- arch/arm/dts/zynqmp-sck-kr-g-revB.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts index caaf71d729e4..d318773bd9d6 100644 --- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts +++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts @@ -210,7 +210,7 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,dp83867-rxctrl-strap-quirk; - reset-assert-us = <100>; + reset-assert-us = <300>; reset-deassert-us = <280>; reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts index f9d87559a719..69dba0761b37 100644 --- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts +++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts @@ -210,7 +210,7 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,dp83867-rxctrl-strap-quirk; - reset-assert-us = <100>; + reset-assert-us = <300>; reset-deassert-us = <280>; reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; }; -- 2.36.1
