On 10.07.23 09:50, Neha Malcom Francis wrote:
> Hi Jan
> 
> On 07/07/23 19:08, Jan Kiszka wrote:
>> On 07.07.23 14:34, Neha Malcom Francis wrote:
>>> Move to using binman to generate tispl.bin which is used to generate the
>>> final flash.bin bootloader for iot2050 boards.
>>>
>>> Signed-off-by: Neha Malcom Francis <n-fran...@ti.com>
>>> Cc: Jan Kiszka <jan.kis...@siemens.com>
>>> ---
>>>   arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 76 +++++++++++++++++++-
>>>   1 file changed, 74 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
>>> b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
>>> index 03ccc54329..9d83898d33 100644
>>> --- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
>>> +++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
>>> @@ -26,9 +26,81 @@
>>>               missing-msg = "iot2050-seboot";
>>>           };
>>>   -        blob@0x180000 {
>>> +        fit@0x180000 {
>>>               offset = <0x180000>;
>>> -            filename = "tispl.bin";
>>> +            pad-byte = <0xff>;
>>> +            description = "Configuration to load ATF and SPL";
>>> +
>>> +            images {
>>> +                atf {
>>> +                    description = "ARM Trusted Firmware";
>>> +                    type = "firmware";
>>> +                    arch = "arm64";
>>> +                    compression = "none";
>>> +                    os = "arm-trusted-firmware";
>>> +                    load = <CONFIG_K3_ATF_LOAD_ADDR>;
>>> +                    entry = <CONFIG_K3_ATF_LOAD_ADDR>;
>>> +                    atf: atf-bl31 {
>>> +                    };
>>> +                };
>>> +
>>> +                tee {
>>> +                    description = "OPTEE";
>>> +                    type = "tee";
>>> +                    arch = "arm64";
>>> +                    compression = "none";
>>> +                    os = "tee";
>>> +                    load = <0x9e800000>;
>>> +                    entry = <0x9e800000>;
>>> +                    tee: tee-os {
>>> +                    };
>>> +                };
>>> +
>>> +                dm {
>>> +                    description = "DM binary";
>>> +                    type = "firmware";
>>> +                    arch = "arm32";
>>> +                    compression = "none";
>>> +                    os = "DM";
>>> +                    load = <0x89000000>;
>>> +                    entry = <0x89000000>;
>>> +                    blob-ext {
>>> +                        filename = "/dev/null";
>>> +                    };
>>> +                };
>>> +
>>> +                spl {
>>> +                    description = "SPL (64-bit)";
>>> +                    type = "standalone";
>>> +                    os = "U-Boot";
>>> +                    arch = "arm64";
>>> +                    compression = "none";
>>> +                    load = <CONFIG_SPL_TEXT_BASE>;
>>> +                    entry = <CONFIG_SPL_TEXT_BASE>;
>>> +                    u_boot_spl_nodtb: blob-ext {
>>> +                        filename = "spl/u-boot-spl-nodtb.bin";
>>> +                    };
>>> +                };
>>> +
>>> +                fdt-0 {
>>> +                    description = "k3-am65-iot2050-spl.dtb";
>>> +                    type = "flat_dt";
>>> +                    arch = "arm";
>>> +                    compression = "none";
>>> +                    spl_am65x_evm_dtb: blob-ext {
>>> +                        filename = "spl/dts/k3-am65-iot2050-spl.dtb";
>>> +                    };
>>> +                };
>>> +            };
>>> +
>>> +            configurations {
>>> +                default = "spl";
>>> +                spl {
>>> +                    fdt = "fdt-0";
>>> +                    firmware = "atf";
>>> +                    loadables = "tee", "dm", "spl";
>>> +                };
>>> +            };
>>>           };
>>>             fit@0x380000 {
>>
>> Looks ok (will have to test), but this lacks adjustment of
>> tools/iot2050-sign-fw.sh, probably something around
>> s/tispl.bin/fit@0x180000/g.
>>
> 
> Okay, let us know once tested.
> 

Done successfully, using this diff:

diff --git a/tools/iot2050-sign-fw.sh b/tools/iot2050-sign-fw.sh
index 4d1d79498c2..598482311ca 100755
--- a/tools/iot2050-sign-fw.sh
+++ b/tools/iot2050-sign-fw.sh
@@ -8,8 +8,8 @@ fi
 TEMP_X509=$(mktemp XXXXXXXX.temp)
 
 REVISION=${2:-0}
-SHA_VAL=$(openssl dgst -sha512 -hex tispl.bin | sed -e "s/^.*= //g")
-BIN_SIZE=$(stat -c %s tispl.bin)
+SHA_VAL=$(openssl dgst -sha512 -hex f...@0x180000.fit | sed -e "s/^.*= //g")
+BIN_SIZE=$(stat -c %s f...@0x180000.fit)
 
 cat <<EOF >$TEMP_X509
 [ req ]
@@ -38,10 +38,10 @@ EOF
 CERT_X509=$(mktemp XXXXXXXX.crt)
 
 openssl req -new -x509 -key $1 -nodes -outform DER -out $CERT_X509 -config 
$TEMP_X509 -sha512
-cat $CERT_X509 tispl.bin > tispl.bin_signed
+cat $CERT_X509 f...@0x180000.fit > fit@0x180000.fit_signed
 # currently broken in upstream
 #source/tools/binman/binman replace -i flash.bin -f tispl.bin_signed 
blob@0x180000
-dd if=tispl.bin_signed of=flash.bin bs=$((0x1000)) seek=$((0x180000/0x1000)) 
conv=notrunc
+dd if=fit@0x180000.fit_signed of=flash.bin bs=$((0x1000)) 
seek=$((0x180000/0x1000)) conv=notrunc
 
 rm $TEMP_X509 $CERT_X509
 

> Regarding the naming used in tools/iot2050-sign-fw.sh; would you like me
> to preserve tispl.bin naming in the dts?
> 

I don't mind, the naming is internal (thanks to the script).

Jan

-- 
Siemens AG, Technology
Competence Center Embedded Linux

Reply via email to