On Wed, May 3, 2023 at 9:12 AM Tim Harvey <[email protected]> wrote: > > On Thu, Apr 27, 2023 at 11:08 AM Fabio Estevam <[email protected]> wrote: > > > > From: Fabio Estevam <[email protected]> > > > > Sync imx8mn.dtsi with Linux 6.3. > > > > Signed-off-by: Fabio Estevam <[email protected]> > > --- > > arch/arm/dts/imx8mn.dtsi | 46 ++++++++++++++++++++++++++++++---------- > > 1 file changed, 35 insertions(+), 11 deletions(-) > > > > diff --git a/arch/arm/dts/imx8mn.dtsi b/arch/arm/dts/imx8mn.dtsi > > index cb2836bfbd95..9e0ddd6b7a32 100644 > > --- a/arch/arm/dts/imx8mn.dtsi > > +++ b/arch/arm/dts/imx8mn.dtsi > > @@ -139,6 +139,7 @@ > > A53_L2: l2-cache0 { > > compatible = "cache"; > > cache-level = <2>; > > + cache-unified; > > cache-size = <0x80000>; > > cache-line-size = <64>; > > cache-sets = <512>; > > @@ -295,6 +296,7 @@ > > sai2: sai@30020000 { > > compatible = "fsl,imx8mn-sai", > > "fsl,imx8mq-sai"; > > reg = <0x30020000 0x10000>; > > + #sound-dai-cells = <0>; > > interrupts = <GIC_SPI 96 > > IRQ_TYPE_LEVEL_HIGH>; > > clocks = <&clk IMX8MN_CLK_SAI2_IPG>, > > <&clk IMX8MN_CLK_DUMMY>, > > @@ -309,6 +311,7 @@ > > sai3: sai@30030000 { > > compatible = "fsl,imx8mn-sai", > > "fsl,imx8mq-sai"; > > reg = <0x30030000 0x10000>; > > + #sound-dai-cells = <0>; > > interrupts = <GIC_SPI 50 > > IRQ_TYPE_LEVEL_HIGH>; > > clocks = <&clk IMX8MN_CLK_SAI3_IPG>, > > <&clk IMX8MN_CLK_DUMMY>, > > @@ -323,6 +326,7 @@ > > sai5: sai@30050000 { > > compatible = "fsl,imx8mn-sai", > > "fsl,imx8mq-sai"; > > reg = <0x30050000 0x10000>; > > + #sound-dai-cells = <0>; > > interrupts = <GIC_SPI 90 > > IRQ_TYPE_LEVEL_HIGH>; > > clocks = <&clk IMX8MN_CLK_SAI5_IPG>, > > <&clk IMX8MN_CLK_DUMMY>, > > @@ -339,6 +343,7 @@ > > sai6: sai@30060000 { > > compatible = "fsl,imx8mn-sai", > > "fsl,imx8mq-sai"; > > reg = <0x30060000 0x10000>; > > + #sound-dai-cells = <0>; > > interrupts = <GIC_SPI 90 > > IRQ_TYPE_LEVEL_HIGH>; > > clocks = <&clk IMX8MN_CLK_SAI6_IPG>, > > <&clk IMX8MN_CLK_DUMMY>, > > @@ -396,6 +401,7 @@ > > sai7: sai@300b0000 { > > compatible = "fsl,imx8mn-sai", > > "fsl,imx8mq-sai"; > > reg = <0x300b0000 0x10000>; > > + #sound-dai-cells = <0>; > > interrupts = <GIC_SPI 111 > > IRQ_TYPE_LEVEL_HIGH>; > > clocks = <&clk IMX8MN_CLK_SAI7_IPG>, > > <&clk IMX8MN_CLK_DUMMY>, > > @@ -497,6 +503,8 @@ > > compatible = "fsl,imx8mn-tmu", > > "fsl,imx8mm-tmu"; > > reg = <0x30260000 0x10000>; > > clocks = <&clk IMX8MN_CLK_TMU_ROOT>; > > + nvmem-cells = <&tmu_calib>; > > + nvmem-cell-names = "calib"; > > #thermal-sensor-cells = <0>; > > }; > > > > @@ -551,7 +559,7 @@ > > reg = <0x30330000 0x10000>; > > }; > > > > - gpr: iomuxc-gpr@30340000 { > > + gpr: syscon@30340000 { > > compatible = "fsl,imx8mn-iomuxc-gpr", > > "syscon"; > > reg = <0x30340000 0x10000>; > > }; > > @@ -563,23 +571,40 @@ > > #address-cells = <1>; > > #size-cells = <1>; > > > > - imx8mn_uid: unique-id@410 { > > + /* > > + * The register address below maps to the > > MX8M > > + * Fusemap Description Table entries this > > way. > > + * Assuming > > + * reg = <ADDR SIZE>; > > + * then > > + * Fuse Address = (ADDR * 4) + 0x400 > > + * Note that if SIZE is greater than 4, then > > + * each subsequent fuse is located at offset > > + * +0x10 in Fusemap Description Table (e.g. > > + * reg = <0x4 0x8> describes fuses 0x410 and > > + * 0x420). > > + */ > > + imx8mn_uid: unique-id@4 { /* 0x410-0x420 */ > > reg = <0x4 0x8>; > > }; > > > > - cpu_speed_grade: speed-grade@10 { > > + cpu_speed_grade: speed-grade@10 { /* 0x440 > > */ > > reg = <0x10 4>; > > }; > > > > - fec_mac_address: mac-address@90 { > > + tmu_calib: calib@3c { /* 0x4f0 */ > > + reg = <0x3c 4>; > > + }; > > + > > + fec_mac_address: mac-address@90 { /* 0x640 > > */ > > reg = <0x90 6>; > > }; > > }; > > > > - anatop: anatop@30360000 { > > - compatible = "fsl,imx8mn-anatop", > > "fsl,imx8mm-anatop", > > - "syscon"; > > + anatop: clock-controller@30360000 { > > + compatible = "fsl,imx8mn-anatop", > > "fsl,imx8mm-anatop"; > > reg = <0x30360000 0x10000>; > > + #clock-cells = <1>; > > }; > > > > snvs: snvs@30370000 { > > @@ -662,7 +687,6 @@ > > pgc_otg1: power-domain@1 { > > #power-domain-cells = <0>; > > reg = > > <IMX8MN_POWER_DOMAIN_OTG1>; > > - power-domains = > > <&pgc_hsiomix>; > > }; > > > > pgc_gpumix: power-domain@2 { > > @@ -1076,7 +1100,7 @@ > > assigned-clock-parents = <&clk > > IMX8MN_SYS_PLL2_500M>; > > phys = <&usbphynop1>; > > fsl,usbmisc = <&usbmisc1 0>; > > - power-domains = <&pgc_otg1>; > > + power-domains = <&pgc_hsiomix>; > > status = "disabled"; > > }; > > > > @@ -1094,7 +1118,6 @@ > > <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > > <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > > <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > > - interrupt-names = "gpmi0", "gpmi1", "gpmi2", > > "gpmi3"; > > #dma-cells = <1>; > > dma-channels = <4>; > > clocks = <&clk > > IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; > > @@ -1103,7 +1126,7 @@ > > gpmi: nand-controller@33002000 { > > compatible = "fsl,imx8mn-gpmi-nand", > > "fsl,imx7d-gpmi-nand"; > > #address-cells = <1>; > > - #size-cells = <1>; > > + #size-cells = <0>; > > reg = <0x33002000 0x2000>, <0x33004000 0x4000>; > > reg-names = "gpmi-nand", "bch"; > > interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > > @@ -1175,5 +1198,6 @@ > > assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; > > assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>; > > clock-names = "main_clk"; > > + power-domains = <&pgc_otg1>; > > }; > > }; > > -- > > 2.34.1 > > > > with commit bb6ea0fe9290 ("usb: ehci-mx6: move phy setup before > register access") now in imx/master: > Tested-by: Tim Harvey <[email protected]> #imx8mn-venice-gw7902 >
Stefano, It doesn't look like this got picked up in your latest tree for some reason. Best regards, Tim
