On 4/27/23 11:59, Stefan Roese wrote:
Adding just a tiny bit more code for sama5d2_icp_mmc leads to a SRAM
image overflow. Fix this by enabling LTO for this board, so that such
changes still can be made to the common U-Boot code.
Signed-off-by: Stefan Roese <[email protected]>
Cc: Tudor Ambarus <[email protected]>
Cc: Eugen Hristev <[email protected]>
Cc: Sergiu Moga <[email protected]>
Cc: Pali Rohár <[email protected]>
---
configs/sama5d2_icp_mmc_defconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/configs/sama5d2_icp_mmc_defconfig
b/configs/sama5d2_icp_mmc_defconfig
index e1b602d8e5ec..a3c57a3f1250 100644
--- a/configs/sama5d2_icp_mmc_defconfig
+++ b/configs/sama5d2_icp_mmc_defconfig
@@ -9,9 +9,11 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0
+CONFIG_SF_DEFAULT_SPEED=66000000
CONFIG_ENV_SIZE=0x4000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_icp"
+CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
@@ -24,6 +26,7 @@ CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_DEBUG_UART=y
+CONFIG_LTO=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_MONITOR_LEN=524288
CONFIG_FIT=y
@@ -86,7 +89,6 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ATMEL=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_BUS=2
-CONFIG_SF_DEFAULT_SPEED=66000000
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_MACRONIX=y
@@ -110,5 +112,4 @@ CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_ATMEL_TCB_TIMER=y
CONFIG_SPL_ATMEL_TCB_TIMER=y
-CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_EFI_LOADER_HII is not set
Mihai (added to the thread) tested this patch on sama5d2_icp.
Mihai, can you add your Tested-by tag then?
This is the original LTO patch for sama5d2_icp that we discussed about.
Thanks, Eugen
