Hi Heinrich, On Sat, 12 Aug 2023 at 23:01, Heinrich Schuchardt <[email protected]> wrote: > > board_get_usable_ram_top() returns a physical address that is stored in > gd->ram_top. The return type of the function should be phys_addr_t like the > current type of gd->ram_top. > > Signed-off-by: Heinrich Schuchardt <[email protected]> > --- > arch/arm/mach-imx/imx8m/soc.c | 2 +- > arch/arm/mach-mvebu/arm64-common.c | 2 +- > arch/arm/mach-rockchip/sdram.c | 2 +- > arch/arm/mach-stm32mp/dram_init.c | 2 +- > arch/arm/mach-sunxi/board.c | 2 +- > arch/arm/mach-tegra/board2.c | 2 +- > arch/mips/mach-jz47xx/jz4780/jz4780.c | 2 +- > arch/mips/mach-octeon/dram.c | 2 +- > arch/riscv/cpu/fu540/dram.c | 2 +- > arch/riscv/cpu/fu740/dram.c | 2 +- > arch/riscv/cpu/generic/dram.c | 2 +- > arch/riscv/cpu/jh7110/dram.c | 2 +- > arch/x86/cpu/broadwell/sdram.c | 2 +- > arch/x86/cpu/coreboot/sdram.c | 2 +- > arch/x86/cpu/efi/payload.c | 2 +- > arch/x86/cpu/efi/sdram.c | 2 +- > arch/x86/cpu/ivybridge/sdram.c | 2 +- > arch/x86/cpu/qemu/dram.c | 2 +- > arch/x86/cpu/quark/dram.c | 2 +- > arch/x86/cpu/slimbootloader/sdram.c | 2 +- > arch/x86/cpu/tangier/sdram.c | 2 +- > arch/x86/include/asm/u-boot-x86.h | 2 +- > arch/x86/lib/fsp1/fsp_dram.c | 2 +- > arch/x86/lib/fsp2/fsp_dram.c | 2 +- > board/broadcom/bcmns3/ns3.c | 2 +- > board/imgtec/boston/ddr.c | 2 +- > board/menlo/m53menlo/m53menlo.c | 2 +- > board/raspberrypi/rpi/rpi.c | 2 +- > board/ti/am65x/evm.c | 2 +- > board/ti/j721e/evm.c | 2 +- > board/ti/j721s2/evm.c | 2 +- > board/toradex/verdin-am62/verdin-am62.c | 2 +- > board/xilinx/common/board.c | 2 +- > common/board_f.c | 2 +- > include/init.h | 2 +- > 35 files changed, 35 insertions(+), 35 deletions(-)
While you are here, could you please fix the function comment? [..] > diff --git a/include/init.h b/include/init.h > index 8873081685..b1e1451166 100644 > --- a/include/init.h > +++ b/include/init.h > @@ -304,7 +304,7 @@ int show_board_info(void); > * > * @param total_size Size of U-Boot (unused?) It seems confused about the param, and we should have a return value. Also should explain what this function is used for. > */ > -phys_size_t board_get_usable_ram_top(phys_size_t total_size); > +phys_addr_t board_get_usable_ram_top(phys_size_t total_size); > > int board_early_init_f(void); > > -- > 2.40.1 > Regards, Simon
