Hi Freddie, On Thu, 17 Aug 2023 at 07:57, Freddie <[email protected]> wrote: > > > > On Thu, Aug 17, 2023 at 2:45 PM Simon Glass <[email protected]> wrote: >> >> Hi Freddie, >> >> On Thu, 17 Aug 2023 at 07:39, Freddie <[email protected]> wrote: >> > >> > >> > >> > On Thu, Aug 17, 2023 at 2:19 PM Simon Glass <[email protected]> wrote: >> >> >> >> Hi Freddie, >> >> >> >> On Thu, 17 Aug 2023 at 07:02, Freddie <[email protected]> wrote: >> >> > >> >> > Hi Simon, >> >> > >> >> > I'm quite new to this so sorry for asking so many questions but where >> >> > do I run the 'dump_image -l' command and which code should I look into >> >> > adding print statements to? >> >> >> >> One thing is to add your reply at the bottom, not the top. >> >> >> >> Actually it is 'dumpimage -l file.fit' to list the contents of your >> >> fit file called 'file.fit'. The program is built in the tools/ >> >> directory or your build, or you can >> >> >> >> I mean if you are completely stumped, go to where the error is >> >> generated and add lots of debugging around it. This is >> >> boot_get_kernel() which is in v2021.10 is in common/bootm.c - so just >> >> add lots of printf() stuff there, rebuild and run on the board and see >> >> if you can figure out what is wrong. From my side I am really not >> >> sure. >> >> >> >> Feel free to share the FIT through a link if you like. >> >> >> >> Also, you could try using a simple FIT without the signature part. >> >> >> >> > >> >> > I have also just looked into my .config file and this is the contents: >> >> > >> >> > # >> >> > # Automatically generated file; DO NOT EDIT. >> >> > # U-Boot 2021.10 Configuration >> >> > # >> >> > >> >> [..] >> >> >> >> > # >> >> > # Boot images >> >> > # >> >> > # CONFIG_ANDROID_BOOT_IMAGE is not set >> >> > CONFIG_FIT=y >> >> > CONFIG_FIT_EXTERNAL_OFFSET=0x0 >> >> > CONFIG_FIT_FULL_CHECK=y >> >> > CONFIG_FIT_SIGNATURE=y >> >> > CONFIG_FIT_SIGNATURE_MAX_SIZE=0x10000000 >> >> > # CONFIG_FIT_RSASSA_PSS is not set >> >> > # CONFIG_FIT_CIPHER is not set >> >> > # CONFIG_FIT_VERBOSE is not set >> >> > # CONFIG_FIT_BEST_MATCH is not set >> >> > CONFIG_FIT_PRINT=y >> >> > # CONFIG_LEGACY_IMAGE_FORMAT is not set >> >> > CONFIG_SUPPORT_RAW_INITRD=y >> >> > CONFIG_OF_BOARD_SETUP=y >> >> > # CONFIG_OF_SYSTEM_SETUP is not set >> >> > # CONFIG_OF_STDOUT_VIA_ALIAS is not set >> >> > CONFIG_SYS_EXTRA_OPTIONS="" >> >> > CONFIG_HAVE_SYS_TEXT_BASE=y >> >> > CONFIG_ARCH_FIXUP_FDT_MEMORY=y >> >> > # CONFIG_CHROMEOS is not set >> >> > # CONFIG_CHROMEOS_VBOOT is not set >> >> > >> >> [..] >> >> >> >> This has CONFIG_FIT and CONFIG_LEGACY_IMAGE_FORMAT is disabled (since >> >> you have signature verification on). >> >> >> >> Regards, >> >> Simon >> > >> > >> > Hi Simon, >> > >> > Thank you for your advice, I'll make sure to reply at the bottom of the >> > message from now on. >> > >> > I've run the dumpimage command and this was my output: >> > root@freddie-pi-dev:/home/fit# ../optee/u-boot/tools/dumpimage -l image.fit >> > FIT description: RPi FIT Image >> > Created: Thu Aug 3 15:47:15 2023 >> > Image 0 (kernel-1) >> > Description: default kernel >> > Created: Thu Aug 3 15:47:15 2023 >> > Type: Kernel Image >> > Compression: uncompressed >> > Data Size: 20869632 Bytes = 20380.50 KiB = 19.90 MiB >> > Architecture: AArch64 >> > OS: Linux >> > Load Address: 0x12000000 >> > Entry Point: 0x12000000 >> > Hash algo: sha1 >> > Hash value: 08d43ed37129fa26e0f5f9d303a211b708c66783 >> > Image 1 (tee-1) >> > Description: atf >> > Created: Thu Aug 3 15:47:15 2023 >> > Type: Standalone Program >> > Compression: uncompressed >> > Data Size: 1257464 Bytes = 1227.99 KiB = 1.20 MiB >> > Architecture: AArch64 >> > Load Address: 0x08400000 >> > Entry Point: 0x08400000 >> > Hash algo: sha1 >> > Hash value: 4907d9c33098b2767cd6bc4bc9836f2f913464c7 >> > Image 2 (fdt-1) >> > Description: device tree >> > Created: Thu Aug 3 15:47:15 2023 >> > Type: Flat Device Tree >> > Compression: uncompressed >> > Data Size: 32501 Bytes = 31.74 KiB = 0.03 MiB >> > Architecture: AArch64 >> > Load Address: 0x01000000 >> > Hash algo: sha1 >> > Hash value: 1b5bb266752cb247d89245c63bd041acfa34c7c0 >> > Default Configuration: 'config-1' >> > Configuration 0 (config-1) >> > Description: default configuration >> > Kernel: kernel-1 >> > FDT: fdt-1 >> > Loadables: tee-1 >> > Sign algo: sha1,rsa2048:dev >> > Sign value: >> > 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 >> > Timestamp: Thu Aug 3 15:47:15 2023 >> > >> >> That looks fine >> >> > >> > I have tried to use an unsigned FIT before, but I also ran into the same >> > error. In this case, do I simply disable the signature parts of the >> > config, enable the legacy image format option and make the new image >> > without any of the signing or are there other changes as well? >> >> Well no point in trying it then...you can normally just omit the signing >> step. >> >> > >> > Where would be an appropriate place to upload my FIT file to in order to >> > share a link? >> > >> >> Google drive? Anything that allows public links. >> >> At this point, I think debugging it is the only option, as I mentioned >> earlier. I don't know what rpi doesn't enable FIT by default, but >> perhaps there is some reason. >> >> Regards, >> Simon > > > > Hi Simon, > > I have uploaded my FIT file to google drive: > https://drive.google.com/file/d/1Q4GMcrT8tzCCznPe1X_5JA3LLFarW6iO/view?usp=drive_link > > I will now try and do some debugging, thank you very much for your help.
Your image works fine on my rpi_3 with v2021.10 and CONFIG_FIT but I am using the 32-bit build. I am not sure of the magic needed to make it boot 64-bit. I notice that your build date is two weeks ago...are you sure you are putting the new U-Boot on the board? Regards, Simon
