On Fri, 25 Aug 2023 at 08:49, Tom Rini <[email protected]> wrote:
>
> On Thu, Aug 24, 2023 at 09:59:48PM -0400, Jesse Taube wrote:
>
> > Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*")
> > renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately,
> > this meant that the value was no longer available to the Makefile. This
> > caused imxrt to fail to boot. All the other boards that used this
> > variable were unaffected because they were using the default value
> > which is CONFIG_TEXT_BASE.
> >
> > This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default
> > value to CONFIG_TEXT_BASE.
> >
> > Suggested-by: Marek Vasut <[email protected]>
> > Suggested-by: Tom Rini <[email protected]>
> > Signed-off-by: Jesse Taube <[email protected]>
> [snip]
> > diff --git a/boot/Kconfig b/boot/Kconfig
> > index 5e2d4286ae..3883cae2ba 100644
> > --- a/boot/Kconfig
> > +++ b/boot/Kconfig
> > @@ -738,7 +738,24 @@ config TEXT_BASE
> >       default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
> >       hex "Text Base"
> >       help
> > -       The address in memory that U-Boot will be running from, initially.
> > +       The address in memory that U-Boot will be copied and executed from 
> > initially.
> > +
> > +config HAVE_SYS_UBOOT_START
> > +     bool "Use custom U-Boot Start"

start ?

> > +     depends on HAVE_TEXT_BASE
> > +     help
> > +       By default, the address in memory that U-Boot will be copied from 
> > (TEXT_BASE) and the
> > +       entry point are the same. Select this to start the execution of 
> > U-Boot from a different address.
> > +       This may be required if a header or vector table needs to be copied 
> > but not executed.

Nice help!

> > +
> > +config SYS_UBOOT_START
> > +     hex
> > +     depends on HAVE_TEXT_BASE
> > +     default TEXT_BASE
> > +     prompt "U-Boot entry" if HAVE_SYS_UBOOT_START
> > +     help
> > +       If TEXT_BASE differs from the start of execution, this sets the 
> > address in memory that
> > +       U-Boot will start execution from initially.
>
> A small point, these help texts should wrap at 80 columns.  If there's
> no other feedback I'll just fix that up when applying unless you want
> to.
>
> Reviewed-by: Tom Rini <[email protected]>

Reviewed-by: Simon Glass <[email protected]>

Yes please

Reply via email to