Hi, On 21/09/23 21:52, Masahiro Yamada wrote: > On Fri, Sep 22, 2023 at 12:03 AM Masahiro Yamada <masahi...@kernel.org> wrote: >> >> Hi. >> >> I am seeing a boot failure on AM64-SK. >> >> >> I got the following error in SPL of the main core. >> Do you have any clue? > > > > As a side-topic, I downloaded a prebuilt image > from https://www.ti.com/tool/SK-AM64 > > It failed too (but in a different way). > > I flashed tisdk-debian-bookworm-am64xx-evm.wic > to a SD card by using the 'dd' command, then I got this: >
Prebuilt images are targeted for High Secure (HS FS) devices. Looks like the board has a non HS Silicon (GP). Please overwrite the tiboot3.bin in boot partition with that of GP cp tiboot3-am64x-gp-evm.bin tiboot3.bin > > > U-Boot SPL 2023.04 (Jul 14 2023 - 08:10:06 +0000) > EEPROM not available at 0x50, trying to read at 0x51 > k3_system_controller sysctrler: k3_sysctrler_start: Boot Notification > response failed. ret = -110 > Firmware init failed on rproc (-110) > > resetting ... > ti_sci system-controller@44043000: ti_sci_get_response: Message > receive failed. ret = -110 > ti_sci system-controller@44043000: ti_sci_get_response: Message > receive failed. ret = -110 > ti_sci system-controller@44043000: ti_sci_get_response: Message > receive failed. ret = -110 > no sysreset > ### ERROR ### Please RESET the board ### > > > > > Am I doing something wrong? > > > > > > -- Regards Vignesh