Hi all, this is v2 of the Conclusive KSTR-SAMA5D27 support series.
Patch [1/3] now also renames the EEPROM serial number function and moves its documentation from .c file to the .h. We should be fine doing that, as - to my knowledge - no other part of U-Boot seems to be using this symbol, as evidenced by the missing prototype. Patch [2/3] is new. It is the direct result of moving i2c as a child of flexcom (see below). Patch [3/3] now also addresses multiple dts issues. In particular, all node access is now being done through label references, unused nodes have been removed, and the i2c now goes explicitly through flexcom. Artur Rojek (3): common: add prototype & rename populate_serial_number() arm: dts: at91: sama5: Add flexcom4 node board: Add support for Conclusive KSTR-SAMA5D27 arch/arm/dts/Makefile | 3 + arch/arm/dts/at91-kstr-sama5d27.dts | 131 ++++++++++ arch/arm/dts/sama5d2.dtsi | 20 ++ arch/arm/mach-at91/Kconfig | 13 + board/conclusive/kstr-sama5d27/Kconfig | 15 ++ board/conclusive/kstr-sama5d27/MAINTAINERS | 8 + board/conclusive/kstr-sama5d27/Makefile | 5 + .../conclusive/kstr-sama5d27/kstr-sama5d27.c | 234 ++++++++++++++++++ cmd/tlv_eeprom.c | 14 +- configs/kstr_sama5d27_defconfig | 80 ++++++ include/configs/kstr-sama5d27.h | 15 ++ include/init.h | 14 ++ 12 files changed, 539 insertions(+), 13 deletions(-) create mode 100644 arch/arm/dts/at91-kstr-sama5d27.dts create mode 100644 board/conclusive/kstr-sama5d27/Kconfig create mode 100644 board/conclusive/kstr-sama5d27/MAINTAINERS create mode 100644 board/conclusive/kstr-sama5d27/Makefile create mode 100644 board/conclusive/kstr-sama5d27/kstr-sama5d27.c create mode 100644 configs/kstr_sama5d27_defconfig create mode 100644 include/configs/kstr-sama5d27.h -- 2.42.0
