On Sunday 06 March 2011 13:13:30 Fawaz wrote: > This patch adds another build target for the AMCC Canyonlands > PPC460Ex eval board. Using JTAG debugger(e.g. BDI2000/3000) configured > to setup the SDRAM. > here are TLB entries required by RAM-u-boot (for BDI2000/3000): > WTLB 0x00000095 0x0000003F ;SDRAM 256MB @ 0x00000000 > WTLB 0xE0000075 0x4E00003F > WTLB 0xE1000005 0x4E10001B > WTLB 0xE3000054 0x4000003F > keep SDRAM configuration part as it's. > > Signed-off-by: Fawaz Gaili <fwaz...@gmail.com> > Cc: Stefan Roese <s...@denx.de> > Cc: Wolfgang Denk <w...@denx.de> > Cc: Felix Radensky <fe...@embedded-sol.com>
Your patch is line wrapped and can't be applied. Please fix this in your mailer, or even better, use "git send-email" to send your patches. And did you check if this RAM-booting target also works when it is loaded/started via an already running U-Boot (instead of via the JTAG debugger)? Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot