On Thu, Oct 5, 2023 at 6:40 PM <egyszer...@freemail.hu> wrote:
>
> From: Benjamin Szőke <egyszer...@freemail.hu>
>
> Take over codes from Techenxion to support mmc autodetect boot for pico-imx7d.
>
> Signed-off-by: Benjamin Szőke <egyszer...@freemail.hu>
Still not good:
WARNING: Possible unwrapped commit description (prefer a maximum 75
chars per line)
#57:
Take over codes from Techenxion to support mmc autodetect boot for pico-imx7d.
WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef'
where possible
#90: FILE: board/technexion/pico-imx7d/pico-imx7d.c:134:
+#if CONFIG_IS_ENABLED(FSL_ESDHC_IMX)
CHECK: Unnecessary parentheses around 'autodetect_str != NULL'
#95: FILE: board/technexion/pico-imx7d/pico-imx7d.c:139:
+ if ((autodetect_str != NULL) &&
+ (strcmp(autodetect_str, "yes") == 0)) {
CHECK: Comparison to NULL could be written "autodetect_str"
#95: FILE: board/technexion/pico-imx7d/pico-imx7d.c:139:
+ if ((autodetect_str != NULL) &&
CHECK: Alignment should match open parenthesis
#96: FILE: board/technexion/pico-imx7d/pico-imx7d.c:140:
+ if ((autodetect_str != NULL) &&
+ (strcmp(autodetect_str, "yes") == 0)) {
ERROR: switch and case should be at the same indent
#111: FILE: board/technexion/pico-imx7d/pico-imx7d.c:155:
+ switch (get_boot_device()) {
+ case SD3_BOOT:
+ case MMC3_BOOT:
[...]
+ case SD1_BOOT:
[...]
+ default:
ERROR: trailing whitespace
#127: FILE: board/technexion/pico-imx7d/pico-imx7d.c:171:
+^I$
WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef'
where possible
#140: FILE: board/technexion/pico-imx7d/pico-imx7d.c:224:
+#if CONFIG_IS_ENABLED(FSL_ESDHC_IMX)
WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef'
where possible
#141: FILE: board/technexion/pico-imx7d/pico-imx7d.c:225:
+#if defined(CONFIG_ENV_IS_IN_MMC) || defined(CONFIG_ENV_IS_NOWHERE)
WARNING: Move const after static - use 'static const iomux_v3_cfg_t'
#178: FILE: board/technexion/pico-imx7d/spl.c:165:
+static iomux_v3_cfg_t const usdhc1_pads[] = {
WARNING: Move const after static - use 'static const iomux_v3_cfg_t'
#189: FILE: board/technexion/pico-imx7d/spl.c:176:
+static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
CHECK: Lines should not end with a '('
#238: FILE: board/technexion/pico-imx7d/spl.c:225:
+ imx_iomux_v3_setup_multiple_pads(
CHECK: Lines should not end with a '('
#242: FILE: board/technexion/pico-imx7d/spl.c:229:
+ imx_iomux_v3_setup_multiple_pads(
ERROR: switch and case should be at the same indent
#246: FILE: board/technexion/pico-imx7d/spl.c:233:
+ switch (get_boot_device()) {
+ case SD1_BOOT:
[...]
+ case MMC3_BOOT:
[...]
+ case SD3_BOOT:
+ default:
total: 3 errors, 6 warnings, 5 checks, 220 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
NOTE: Whitespace errors detected.
You may wish to use scripts/cleanpatch or scripts/cleanfile
