On 10/8/23 22:59, Fabio Estevam wrote:
From: Fabio Estevam <[email protected]>
Select the USB options to allow running "ums 0 mmc 0".
Signed-off-by: Fabio Estevam <[email protected]>
---
Changes since v1:
- Remove unrelated config options. (Marek)
configs/mx28evk_defconfig | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
index df0cceaea719..0b7c4b252ff0 100644
--- a/configs/mx28evk_defconfig
+++ b/configs/mx28evk_defconfig
@@ -32,6 +32,8 @@ CONFIG_CMD_DM=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT4=y
@@ -65,3 +67,13 @@ CONFIG_RTC_MXS=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_USB=y
+CONFIG_SPL_USB_HOST=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MAX_CONTROLLER_COUNT=2
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
But the SPL SDP is still here ^ , how come ?
