Hello Lei,

Lei Wen wrote:
> Signed-off-by: Lei Wen <lei...@marvell.com>
> ---
>  drivers/i2c/mvi2c.c |   37 ++++++++++++++++++++++++++++++++++++-
>  1 files changed, 36 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/i2c/mvi2c.c b/drivers/i2c/mvi2c.c
> index 0e37417..ca1add8 100644
> --- a/drivers/i2c/mvi2c.c
> +++ b/drivers/i2c/mvi2c.c
> @@ -131,9 +131,38 @@ struct pxa_i2c {
>       u32 isar;
>  };
>  
> -static struct pxa_i2c *base = (struct pxa_i2c *)CONFIG_PXA_I2C_REG;
>  #define PXAI2C_AND(reg, val) writel(readl(reg) & val, reg)
>  #define PXAI2C_OR(reg, val)  writel(readl(reg) | val, reg)
> +static struct pxa_i2c *base;
> +
> +#ifdef CONFIG_I2C_MULTI_BUS
> +static u32 i2c_regs[CONFIG_PXA_I2C_NUM] = CONFIG_PXA_I2C_REG;
> +static unsigned int bus_initialized[CONFIG_PXA_I2C_NUM];
> +static unsigned int current_bus = 0;
> +
> +int i2c_set_bus_num(unsigned int bus)
> +{
> +     if ((bus < 0) || (bus >= CONFIG_PXA_I2C_NUM)) {
> +             printf("Bad bus: %d\n", bus);
> +             return -1;
> +     }
> +
> +     base = (struct pxa_i2c *)i2c_regs[bus];
> +     current_bus = bus;
> +
> +     if(!bus_initialized[current_bus]) {
          ^
          add a space here, thanks

> +             i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
> +             bus_initialized[current_bus] = 1;
> +     }
> +
> +     return 0;
> +}
> +
> +unsigned int i2c_get_bus_num(void)
> +{
> +     return current_bus;
> +}
> +#endif
>  
>  /**
>   * i2c_pxa_reset: - reset the host controller
> @@ -311,6 +340,12 @@ i2c_transfer_finish:
>  
>  void i2c_init(int speed, int slaveaddr)
>  {
> +#ifdef CONFIG_I2C_MULTI_BUS
> +     base = (struct pxa_i2c *)i2c_regs[current_bus];
> +#else
> +     base = (struct pxa_i2c *)CONFIG_PXA_I2C_REG;
> +#endif
> +
>  #ifdef CONFIG_SYS_I2C_INIT_BOARD
>       u32 icr;
>       /* call board specific i2c bus reset routine before accessing the   */

beside of that, your patch looks good.

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to