Hi Ilias, On Fri, 27 Oct 2023 at 03:58, Ilias Apalodimas <ilias.apalodi...@linaro.org> wrote: > > On Wed, 25 Oct 2023 at 09:52, Masahisa Kojima > <masahisa.koj...@linaro.org> wrote: > > > > There are two kinds of NOR flash layout for the Developerbox. > > Capsule update for the old layout is no longer available since > > it has small capacity for secure world images and can not > > house the TA such as fTPM. > > This commit removes the definition related to the obsolete > > NOR flash layout for the UEFI capsule update. > > > > Signed-off-by: Masahisa Kojima <masahisa.koj...@linaro.org> > > Acked-by: Jassi Brar <jaswinder.si...@linaro.org> > > --- > > include/configs/synquacer.h | 19 ------------------- > > 1 file changed, 19 deletions(-) > > > > diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h > > index cd7359c2f8..e36e63e81e 100644 > > --- a/include/configs/synquacer.h > > +++ b/include/configs/synquacer.h > > @@ -40,20 +40,6 @@ > > > > /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support > > */ > > > > -#ifdef CONFIG_FWU_MULTI_BANK_UPDATE > > -#define DEFAULT_DFU_ALT_INFO > > -#else > > -#define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \ > > - "mtd nor1=u-boot.bin raw 200000 100000;" \ > > - "fip.bin raw 180000 78000;" \ > > - "optee.bin raw 500000 100000\0" > > -#endif > > We don't need any of these because we use the .dfu_alt_string to > generate those right?
You are correct. We can generate dfu_alt_info from .dfu_string. Thanks, Masahisa Kojima > > > - > > -/* GUIDs for capsule updatable firmware images */ > > -#define DEVELOPERBOX_UBOOT_IMAGE_GUID \ > > - EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \ > > - 0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00) > > - > > #ifdef CONFIG_FWU_MULTI_BANK_UPDATE > > #define DEVELOPERBOX_FIP_IMAGE_GUID \ > > EFI_GUID(0x7d6dc310, 0x52ca, 0x43b8, 0xb7, 0xb9, \ > > @@ -64,10 +50,6 @@ > > 0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98) > > #endif > > > > -#define DEVELOPERBOX_OPTEE_IMAGE_GUID \ > > - EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \ > > - 0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30) > > - > > /* Distro boot settings */ > > #ifdef CONFIG_CMD_USB > > #define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0) > > @@ -107,7 +89,6 @@ > > "ramdisk_addr_r=0xa0000000\0" \ > > "scriptaddr=0x88000000\0" \ > > "pxefile_addr_r=0x88100000\0" \ > > - DEFAULT_DFU_ALT_INFO \ > > BOOTENV > > > > #endif /* __CONFIG_H */ > > -- > > 2.34.1 > > > Thanks > /Ilias