PBL(pre-boot loader): SPI flash used as RCW(Reset Configuration Word) and PBI(pre-boot initialization) source, CPC(CoreNet Platform Cache) used as 1M SRAM where PBL will copy whole U-BOOT image to, U-boot can boot from CPC after PBL completes RCW and PBI phases.
Signed-off-by: Chunhe Lan <[email protected]> Signed-off-by: Mingkai Hu <[email protected]> Signed-off-by: Shaohui Xie <[email protected]> Signed-off-by: Roy Zang <[email protected]> --- arch/powerpc/cpu/mpc85xx/cpu_init.c | 19 +++++++++++++++++++ board/freescale/corenet_ds/tlb.c | 12 +++++++++++- boards.cfg | 1 + include/configs/corenet_ds.h | 27 ++++++++++++++++++++++++++- 4 files changed, 57 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 8ece970..a977000 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -141,6 +141,22 @@ static void enable_cpc(void) for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { u32 cpccfg0 = in_be32(&cpc->cpccfg0); size += CPC_CFG0_SZ_K(cpccfg0); +#ifdef CONFIG_RAMBOOT_PBL + if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) { + /* find and disable LAW of SRAM */ + struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR); + + if (law.index == -1) { + printf("\nFatal error happened\n"); + return; + } + disable_law(law.index); + + clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS); + out_be32(&cpc->cpccsr0, 0); + out_be32(&cpc->cpcsrcr0, 0); + } +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS); @@ -164,6 +180,9 @@ void invalidate_cpc(void) cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { + /* skip CPC when it used as all SRAM */ + if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) + continue; /* Flash invalidate the CPC and clear all the locks */ out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC); while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC)) diff --git a/board/freescale/corenet_ds/tlb.c b/board/freescale/corenet_ds/tlb.c index 1ae0416..fe77e79 100644 --- a/board/freescale/corenet_ds/tlb.c +++ b/board/freescale/corenet_ds/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, [email protected]. @@ -51,9 +51,19 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 1 */ /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the + * SRAM is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#else SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_4K, 1), +#endif /* *I*G* - CCSRBAR */ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, diff --git a/boards.cfg b/boards.cfg index 45c3102..f19cc34 100644 --- a/boards.cfg +++ b/boards.cfg @@ -529,6 +529,7 @@ P2020RDB_NAND powerpc mpc85xx p1_p2_rdb freesca P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH P4080DS powerpc mpc85xx corenet_ds freescale +P4080DS_RAMBOOT_PBL powerpc mpc85xx corenet_ds freescale - P4080DS:RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF80000 mpq101 powerpc mpc85xx mpq101 mercury - mpq101 stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index bff212e..8d10862 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -28,6 +28,11 @@ #include "../board/freescale/common/ics307_clk.h" +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 /* BOOKE e500 family */ @@ -63,12 +68,17 @@ #define CONFIG_ENV_OVERWRITE +#if defined(CONFIG_RAMBOOT_PBL) + #define CONFIG_SYS_NO_FLASH /* Store ENV in memory only */ +#endif + #ifdef CONFIG_SYS_NO_FLASH #define CONFIG_ENV_IS_NOWHERE #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #endif #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ @@ -100,6 +110,18 @@ #define CONFIG_PANIC_HANG /* do not reset board on panic */ /* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) +#else +#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR +#endif +#define CONFIG_SYS_L3_SIZE (1024 << 10) +#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) + +/* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ @@ -192,6 +214,10 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} @@ -461,7 +487,6 @@ /* * Environment */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -- 1.6.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
