On Nov 13, 2023 at 08:59:18 -0600, Nishanth Menon wrote:
> Kernel dts import now provides bootph-all and bootph-pre-ram properties
> for the properties we have been overriding so far. Drop the same.
> 
> Signed-off-by: Nishanth Menon <n...@ti.com>
> ---
>  arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 56 --------------------
>  1 file changed, 56 deletions(-)
> 
> diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi 
> b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> index 6f3a31558b20..7f8468f298f0 100644
> --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> @@ -13,36 +13,26 @@
>               tick-timer = &main_timer0;
>       };
>  
> -     memory@80000000 {
> -             bootph-all;
> -     };
> -
>       /* Keep the LEDs on by default to indicate life */
>       leds {
> -             bootph-all;
>               led-0 {
>                       default-state = "on";
> -                     bootph-all;
>               };
>  
>               led-1 {
>                       default-state = "on";
> -                     bootph-all;
>               };
>  
>               led-2 {
>                       default-state = "on";
> -                     bootph-all;
>               };
>  
>               led-3 {
>                       default-state = "on";
> -                     bootph-all;
>               };
>  
>               led-4 {
>                       default-state = "on";
> -                     bootph-all;
>               };
>       };
>  };
> @@ -58,45 +48,7 @@
>       };
>  };
>  
> -&main_uart0 {
> -     bootph-all;
> -};
> -
> -&console_pins_default {
> -     bootph-all;
> -};
> -
> -&main_i2c0 {
> -     bootph-all;
> -};
> -
> -&local_i2c_pins_default {
> -     bootph-all;
> -};
> -
> -&gpio0_pins_default {
> -     bootph-all;
> -};
> -
> -&main_gpio0 {
> -     bootph-all;
> -};
> -
> -&main_gpio1 {
> -     bootph-all;
> -};
> -
> -&sdhci0 {
> -     /* EMMC */
> -     bootph-all;
> -};
> -
> -&emmc_pins_default {
> -     bootph-all;
> -};
> -
>  &sd_pins_default {
> -     bootph-all;
>       /* Force to use SDCD card detect pin */
>       pinctrl-single,pins = <
>               AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
> @@ -109,14 +61,6 @@
>       >;
>  };
>  
> -&tps65219 {
> -     bootph-all;
> -};
> -
> -&sdhci1 {
> -     bootph-all;
> -};
> -
>  #ifdef CONFIG_TARGET_AM625_A53_EVM
>  
>  #define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/k3-am625-beagleplay.dtb"

You didn't talk about this in the commit message?

> -- 
> 2.40.0
> 
> 


Rest looks ok,

Reviewed-by: Dhruva Gole <d-g...@ti.com>

-- 
Best regards,
Dhruva Gole <d-g...@ti.com>

Reply via email to