The kconfig option SPL means this build supports SPL but not that
this build is SPL, nor that this build is the SPL running on R5.
For options that are for R5 SPL use CPU_V7R.
Signed-off-by: Andrew Davis <a...@ti.com>
---
arch/arm/mach-k3/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 9168bf842dc..4d19cf3e353 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -111,7 +111,7 @@ config K3_EARLY_CONS_IDX
config K3_LOAD_SYSFW
bool
- depends on SPL
+ depends on CPU_V7R
config K3_SYSFW_IMAGE_NAME
string "File name of SYSFW firmware and configuration blob"
@@ -158,7 +158,7 @@ config K3_SYSFW_IMAGE_SPI_OFFS
config SYS_K3_SPL_ATF
bool "Start Cortex-A from SPL"
- depends on SPL && CPU_V7R
+ depends on CPU_V7R
help
Enabling this will try to start Cortex-A (typically with ATF)
after SPL from R5.
@@ -172,7 +172,7 @@ config K3_ATF_LOAD_ADDR
config K3_DM_FW
bool "Separate DM firmware image"
- depends on SPL && CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2 ||
SOC_K3_AM625 || SOC_K3_AM62A7) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
+ depends on CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_AM625 ||
SOC_K3_AM62A7) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
default y
help
Enabling this will indicate that the system has separate DM
--
2.39.2
