Required for using the new DM based atmel nand driver. Ported from Linux v6.7-rc4.
Signed-off-by: Alexander Dahl <[email protected]> --- arch/arm/dts/sama5d2.dtsi | 56 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi index c28a544da6f..0dbacade3b6 100644 --- a/arch/arm/dts/sama5d2.dtsi +++ b/arch/arm/dts/sama5d2.dtsi @@ -34,6 +34,15 @@ #size-cells = <1>; bootph-all; + nfc_sram: sram@100000 { + compatible = "mmio-sram"; + no-memory-wc; + reg = <0x00100000 0x2400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00100000 0x2400>; + }; + usb1: ohci@400000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; @@ -50,6 +59,32 @@ status = "disabled"; }; + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&hsmc>; + reg = <0x10000000 0x10000000 + 0x60000000 0x30000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x60000000 0x10000000 + 0x2 0x0 0x70000000 0x10000000 + 0x3 0x0 0x80000000 0x10000000>; + clocks = <&h32ck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,sama5d3-nand-controller"; + atmel,nfc-sram = <&nfc_sram>; + atmel,nfc-io = <&nfc_io>; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + sdmmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; @@ -66,6 +101,11 @@ status = "disabled"; }; + nfc_io: nfc-io@c0000000 { + compatible = "atmel,sama5d3-nfc-io", "syscon"; + reg = <0xc0000000 0x8000000>; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -657,6 +697,22 @@ }; }; + hsmc: hsmc@f8014000 { + compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; + reg = <0xf8014000 0x1000>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; + clocks = <&hsmc_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmecc: ecc-engine@f8014070 { + compatible = "atmel,sama5d2-pmecc"; + reg = <0xf8014070 0x490>, + <0xf8014500 0x200>; + }; + }; + uart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; -- 2.39.2
