On Fri, Nov 3, 2023 at 7:47 PM Fabio Estevam <[email protected]> wrote: > > From: Fabio Estevam <[email protected]> > > With Ethernet DM in place, there is no longer the need for having > the board_phy_config() anymore. > > Remove it. > > Tested on imx7d-pico-pi board: > > => setenv autoload no > => dhcp > BOOTP broadcast 1 > *** Unhandled DHCP Option in OFFER/ACK: 42 > DHCP client bound to address 192.168.0.138 (138 ms) > => tftp zImage > Using ethernet@30be0000 device > TFTP from server 192.168.0.16; our IP address is 192.168.0.138 > Filename 'zImage'. > Load address: 0x80800000 > Loading: ################################################################# > .... > ################################################################# > ########## > 4.3 MiB/s > done > Bytes transferred = 9034120 (89d988 hex) > > Signed-off-by: Fabio Estevam <[email protected]>
Applied to u-boot-imx next, thanks.
