In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console
stdin, stdout, stderr must be defined in environment. Define the default
settings to fix the following warning on boot:
"
In: No input devices available!
Out: No output devices available!
Err: No error devices available!
"
Sort the default environment as well.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-...@nxp.com>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Stefano Babic <sba...@denx.de>
---
include/configs/imx8mm_data_modul_edm_sbc.h | 11 +++++++----
include/configs/imx8mp_data_modul_edm_sbc.h | 9 ++++++---
2 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h
b/include/configs/imx8mm_data_modul_edm_sbc.h
index f7d2b660c1f..b777fe6073b 100644
--- a/include/configs/imx8mm_data_modul_edm_sbc.h
+++ b/include/configs/imx8mm_data_modul_edm_sbc.h
@@ -34,13 +34,11 @@
#define CFG_SYS_FSL_USDHC_NUM 2
#define CFG_SYS_FSL_ESDHC_ADDR 0
-#define CFG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \
"bootlimit=3\0" \
"devtype=mmc\0" \
"devpart=1\0" \
- /* Give slow devices beyond USB HUB chance to come up. */ \
- "usb_pgood_delay=2000\0" \
"dfu_alt_info=" \
/* RAM block at DRAM offset 256..768 MiB */ \
"ram ram0=ram ram 0x50000000 0x20000000&" \
@@ -76,6 +74,11 @@
"setenv stderr ${stderr},nc && " \
"setenv stdout ${stdout},nc && " \
"setenv stdin ${stdin},nc ; " \
- "fi"
+ "fi\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0" \
+ /* Give slow devices beyond USB HUB chance to come up. */ \
+ "usb_pgood_delay=2000\0"
#endif
diff --git a/include/configs/imx8mp_data_modul_edm_sbc.h
b/include/configs/imx8mp_data_modul_edm_sbc.h
index 11ac3c00f7e..8d7954004c2 100644
--- a/include/configs/imx8mp_data_modul_edm_sbc.h
+++ b/include/configs/imx8mp_data_modul_edm_sbc.h
@@ -29,8 +29,6 @@
"bootlimit=3\0" \
"devtype=mmc\0" \
"devpart=1\0" \
- /* Give slow devices beyond USB HUB chance to come up. */ \
- "usb_pgood_delay=2000\0" \
"dmo_update_env=" \
"setenv dmo_update_env true ; saveenv ; saveenv\0" \
"dmo_update_sf_write_data=" \
@@ -40,6 +38,11 @@
"run dmo_update_sf_write_data\0" \
"dmo_update_sd_to_sf=" \
"load mmc 1:1 ${loadaddr} boot/flash.bin && " \
- "run dmo_update_sf_write_data\0"
+ "run dmo_update_sf_write_data\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0" \
+ /* Give slow devices beyond USB HUB chance to come up. */ \
+ "usb_pgood_delay=2000\0"
#endif
--
2.43.0
