On 1/15/24 15:05, Patrick Delaunay wrote:
> CONFIG options must not use lower-case letter. Convert this and related
> ones to upper case.
> 
> Signed-off-by: Simon Glass <s...@chromium.org
> Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
> ---
> See Simon's patch in serie "Clean up of bad Kconfig options" never merged
> https://patchwork.ozlabs.org/project/uboot/list/?series=339004&state=*
> https://patchwork.ozlabs.org/project/uboot/patch/20230129005903.74918-69-...@chromium.org/
> 
> Changes in v2:
> - add "arm: Rename STM32MP15x"
> 
>  arch/arm/dts/Makefile                           |  2 +-
>  arch/arm/dts/stm32mp15-u-boot.dtsi              |  2 +-
>  arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi        |  4 ++--
>  arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi        |  4 ++--
>  arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi        |  4 ++--
>  arch/arm/mach-stm32mp/Kconfig                   |  6 +++---
>  arch/arm/mach-stm32mp/Kconfig.15x               |  6 +++---
>  arch/arm/mach-stm32mp/Makefile                  |  2 +-
>  arch/arm/mach-stm32mp/cmd_stm32key.c            | 10 +++++-----
>  arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h |  4 ++--
>  arch/arm/mach-stm32mp/include/mach/stm32.h      | 12 ++++++------
>  arch/arm/mach-stm32mp/stm32mp1/Makefile         |  2 +-
>  arch/arm/mach-stm32mp/stm32mp1/fdt.c            |  6 +++---
>  board/st/common/Kconfig                         |  2 +-
>  board/st/stm32mp1/Kconfig                       |  2 +-
>  board/st/stm32mp1/stm32mp1.c                    |  6 +++---
>  configs/stm32mp15_basic_defconfig               |  2 +-
>  configs/stm32mp15_defconfig                     |  2 +-
>  configs/stm32mp15_trusted_defconfig             |  4 ++--
>  drivers/clk/stm32/Kconfig                       |  2 +-
>  20 files changed, 42 insertions(+), 42 deletions(-)
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 8dcf1f5717ce..02074440b55d 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1363,7 +1363,7 @@ dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
>  dtb-$(CONFIG_STM32MP13X) += \
>       stm32mp135f-dk.dtb
>  
> -dtb-$(CONFIG_STM32MP15x) += \
> +dtb-$(CONFIG_STM32MP15X) += \
>       stm32mp157a-dk1.dtb \
>       stm32mp157a-dk1-scmi.dtb \
>       stm32mp157a-icore-stm32mp1-ctouch2.dtb \
> diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi 
> b/arch/arm/dts/stm32mp15-u-boot.dtsi
> index 573dd4d3ed56..fe56f05616a0 100644
> --- a/arch/arm/dts/stm32mp15-u-boot.dtsi
> +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
> @@ -206,7 +206,7 @@
>       resets = <&rcc UART8_R>;
>  };
>  
> -#if defined(CONFIG_STM32MP15x_STM32IMAGE)
> +#if defined(CONFIG_STM32MP15X_STM32IMAGE)
>  &binman {
>       u-boot-stm32 {
>               filename = "u-boot.stm32";
> diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi 
> b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
> index 2623cebf21a4..a16358266a2d 100644
> --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
> +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
> @@ -22,13 +22,13 @@
>               st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | 
> GPIO_PULL_UP)>;
>       };
>  
> -#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
> +#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
>       config {
>               u-boot,mmc-env-partition = "ssbl";
>       };
>  #endif
>  
> -#ifdef CONFIG_STM32MP15x_STM32IMAGE
> +#ifdef CONFIG_STM32MP15X_STM32IMAGE
>       /* only needed for boot with TF-A, witout FIP support */
>       firmware {
>               optee {
> diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi 
> b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
> index b8288273ddb5..ef91088aa375 100644
> --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
> +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
> @@ -20,13 +20,13 @@
>               st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | 
> GPIO_PULL_UP)>;
>       };
>  
> -#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
> +#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
>       config {
>               u-boot,mmc-env-partition = "ssbl";
>       };
>  #endif
>  
> -#ifdef CONFIG_STM32MP15x_STM32IMAGE
> +#ifdef CONFIG_STM32MP15X_STM32IMAGE
>       /* only needed for boot with TF-A, witout FIP support */
>       firmware {
>               optee {
> diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi 
> b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
> index eb283cacd27d..139940bd5d47 100644
> --- a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
> +++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
> @@ -28,7 +28,7 @@
>               #address-cells = <1>;
>               #size-cells = <1>;
>  
> -#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
> +#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
>               partition@0 {
>                       label = "fsbl1";
>                       reg = <0x00000000 0x00040000>;
> @@ -82,7 +82,7 @@
>                               #address-cells = <1>;
>                               #size-cells = <1>;
>  
> -#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
> +#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
>                               partition@0 {
>                                       label = "fsbl";
>                                       reg = <0x00000000 0x00200000>;
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index 241fcf3e0d22..a1763ff19993 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -35,7 +35,7 @@ config ENV_SIZE
>  
>  choice
>       prompt "Select STMicroelectronics STM32MPxxx Soc"
> -     default STM32MP15x
> +     default STM32MP15X
>  
>  config STM32MP13X
>       bool "Support STMicroelectronics STM32MP13x Soc"
> @@ -55,7 +55,7 @@ config STM32MP13X
>               support of STMicroelectronics SOC STM32MP13x family
>               STMicroelectronics MPU with core ARMv7
>  
> -config STM32MP15x
> +config STM32MP15X
>       bool "Support STMicroelectronics STM32MP15x Soc"
>       select ARCH_SUPPORT_PSCI
>       select BINMAN
> @@ -127,7 +127,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
>  
>  config STM32_ETZPC
>       bool "STM32 Extended TrustZone Protection"
> -     depends on STM32MP15x || STM32MP13X
> +     depends on STM32MP15X || STM32MP13X
>       default y
>       imply BOOTP_SERVERIP
>       help
> diff --git a/arch/arm/mach-stm32mp/Kconfig.15x 
> b/arch/arm/mach-stm32mp/Kconfig.15x
> index 1d32f8bf3395..71c14eb4955f 100644
> --- a/arch/arm/mach-stm32mp/Kconfig.15x
> +++ b/arch/arm/mach-stm32mp/Kconfig.15x
> @@ -1,6 +1,6 @@
> -if STM32MP15x
> +if STM32MP15X
>  
> -config STM32MP15x_STM32IMAGE
> +config STM32MP15X_STM32IMAGE
>       bool "Support STM32 image for generated U-Boot image"
>       depends on TFABOOT
>       help
> @@ -11,7 +11,7 @@ choice
>       prompt "STM32MP15x board select"
>       optional
>  
> -config TARGET_ST_STM32MP15x
> +config TARGET_ST_STM32MP15X
>       bool "STMicroelectronics STM32MP15x boards"
>       imply BOOTSTAGE
>       imply CMD_BOOTSTAGE
> diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
> index 3d194de0631c..ee8a5428feba 100644
> --- a/arch/arm/mach-stm32mp/Makefile
> +++ b/arch/arm/mach-stm32mp/Makefile
> @@ -8,7 +8,7 @@ obj-y += syscon.o
>  obj-y += bsec.o
>  obj-y += soc.o
>  
> -obj-$(CONFIG_STM32MP15x) += stm32mp1/
> +obj-$(CONFIG_STM32MP15X) += stm32mp1/
>  obj-$(CONFIG_STM32MP13X) += stm32mp1/
>  obj-$(CONFIG_STM32MP25X) += stm32mp2/
>  
> diff --git a/arch/arm/mach-stm32mp/cmd_stm32key.c 
> b/arch/arm/mach-stm32mp/cmd_stm32key.c
> index dcef6ac4fb82..c7fe232f86e0 100644
> --- a/arch/arm/mach-stm32mp/cmd_stm32key.c
> +++ b/arch/arm/mach-stm32mp/cmd_stm32key.c
> @@ -20,7 +20,7 @@
>   */
>  #define STM32_OTP_CLOSE_ID           0
>  #define STM32_OTP_STM32MP13X_CLOSE_MASK      0x3F
> -#define STM32_OTP_STM32MP15x_CLOSE_MASK      BIT(6)
> +#define STM32_OTP_STM32MP15X_CLOSE_MASK      BIT(6)
>  
>  /* PKH is the first element of the key list */
>  #define STM32KEY_PKH 0
> @@ -64,7 +64,7 @@ static u8 get_key_nb(void)
>       if (IS_ENABLED(CONFIG_STM32MP13X))
>               return ARRAY_SIZE(stm32mp13_list);
>  
> -     if (IS_ENABLED(CONFIG_STM32MP15x))
> +     if (IS_ENABLED(CONFIG_STM32MP15X))
>               return ARRAY_SIZE(stm32mp15_list);
>  }
>  
> @@ -73,7 +73,7 @@ static const struct stm32key *get_key(u8 index)
>       if (IS_ENABLED(CONFIG_STM32MP13X))
>               return &stm32mp13_list[index];
>  
> -     if (IS_ENABLED(CONFIG_STM32MP15x))
> +     if (IS_ENABLED(CONFIG_STM32MP15X))
>               return &stm32mp15_list[index];
>  }
>  
> @@ -82,8 +82,8 @@ static u32 get_otp_close_mask(void)
>       if (IS_ENABLED(CONFIG_STM32MP13X))
>               return STM32_OTP_STM32MP13X_CLOSE_MASK;
>  
> -     if (IS_ENABLED(CONFIG_STM32MP15x))
> -             return STM32_OTP_STM32MP15x_CLOSE_MASK;
> +     if (IS_ENABLED(CONFIG_STM32MP15X))
> +             return STM32_OTP_STM32MP15X_CLOSE_MASK;
>  }
>  
>  static int get_misc_dev(struct udevice **dev)
> diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h 
> b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
> index 934ffb1105a0..bf184c8a8846 100644
> --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
> +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
> @@ -23,14 +23,14 @@
>  
>  #define CMD_SIZE             512
>  /* SMC is only supported in SPMIN for STM32MP15x */
> -#ifdef CONFIG_STM32MP15x
> +#ifdef CONFIG_STM32MP15X
>  #define OTP_SIZE_SMC         1024
>  #else
>  #define OTP_SIZE_SMC         0
>  #endif
>  /* size of the OTP struct in NVMEM PTA */
>  #define _OTP_SIZE_TA(otp)    (((otp) * 2 + 2) * 4)
> -#if defined(CONFIG_STM32MP13X) || defined(CONFIG_STM32MP15x)
> +#if defined(CONFIG_STM32MP13X) || defined(CONFIG_STM32MP15X)
>  /* STM32MP1 with BSEC2 */
>  #define OTP_SIZE_TA          _OTP_SIZE_TA(96)
>  #else
> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h 
> b/arch/arm/mach-stm32mp/include/mach/stm32.h
> index 2d7d973368c1..f598da99fbab 100644
> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
> @@ -71,11 +71,11 @@ enum forced_boot_mode {
>   * only address used before device tree parsing
>   */
>  
> -#if defined(CONFIG_STM32MP15x) || defined(CONFIG_STM32MP13X)
> +#if defined(CONFIG_STM32MP15X) || defined(CONFIG_STM32MP13X)
>  #define STM32_RCC_BASE                       0x50000000
>  #define STM32_PWR_BASE                       0x50001000
>  #define STM32_SYSCFG_BASE            0x50020000
> -#ifdef CONFIG_STM32MP15x
> +#ifdef CONFIG_STM32MP15X
>  #define STM32_DBGMCU_BASE            0x50081000
>  #endif
>  #define STM32_FMC2_BASE                      0x58002000
> @@ -88,7 +88,7 @@ enum forced_boot_mode {
>  #define STM32_STGEN_BASE             0x5C008000
>  #define STM32_TAMP_BASE                      0x5C00A000
>  
> -#ifdef CONFIG_STM32MP15x
> +#ifdef CONFIG_STM32MP15X
>  #define STM32_USART1_BASE            0x5C000000
>  #define STM32_USART2_BASE            0x4000E000
>  #endif
> @@ -107,7 +107,7 @@ enum forced_boot_mode {
>  #define STM32_SDMMC2_BASE            0x58007000
>  #define STM32_SDMMC3_BASE            0x48004000
>  
> -#ifdef CONFIG_STM32MP15x
> +#ifdef CONFIG_STM32MP15X
>  #define STM32_SYSRAM_BASE            0x2FFC0000
>  #define STM32_SYSRAM_SIZE            SZ_256K
>  #endif
> @@ -129,7 +129,7 @@ enum forced_boot_mode {
>  /* TAMP registers */
>  #define TAMP_BACKUP_REGISTER(x)              (STM32_TAMP_BASE + 0x100 + 4 * 
> x)
>  
> -#ifdef CONFIG_STM32MP15x
> +#ifdef CONFIG_STM32MP15X
>  #define TAMP_BACKUP_MAGIC_NUMBER     TAMP_BACKUP_REGISTER(4)
>  #define TAMP_BACKUP_BRANCH_ADDRESS   TAMP_BACKUP_REGISTER(5)
>  #define TAMP_FWU_BOOT_INFO_REG               TAMP_BACKUP_REGISTER(10)
> @@ -181,7 +181,7 @@ enum forced_boot_mode {
>  #define STM32_BSEC_LOCK(id)          (STM32_BSEC_LOCK_OFFSET + (id) * 4)
>  
>  /* BSEC OTP index */
> -#ifdef CONFIG_STM32MP15x
> +#ifdef CONFIG_STM32MP15X
>  #define BSEC_OTP_RPN 1
>  #define BSEC_OTP_SERIAL      13
>  #define BSEC_OTP_PKG 16
> diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile 
> b/arch/arm/mach-stm32mp/stm32mp1/Makefile
> index e74342d0c608..857148747ef7 100644
> --- a/arch/arm/mach-stm32mp/stm32mp1/Makefile
> +++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile
> @@ -6,7 +6,7 @@
>  obj-y += cpu.o
>  
>  obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
> -obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
> +obj-$(CONFIG_STM32MP15X) += stm32mp15x.o
>  
>  obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
>  ifdef CONFIG_SPL_BUILD
> diff --git a/arch/arm/mach-stm32mp/stm32mp1/fdt.c 
> b/arch/arm/mach-stm32mp/stm32mp1/fdt.c
> index 9436b872e31e..d0b6c3cc5a55 100644
> --- a/arch/arm/mach-stm32mp/stm32mp1/fdt.c
> +++ b/arch/arm/mach-stm32mp/stm32mp1/fdt.c
> @@ -275,7 +275,7 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node)
>               array_size = ARRAY_SIZE(stm32mp13_ip_addr);
>       }
>  
> -     if (IS_ENABLED(CONFIG_STM32MP15x)) {
> +     if (IS_ENABLED(CONFIG_STM32MP15X)) {
>               array = stm32mp15_ip_addr;
>               array_size = ARRAY_SIZE(stm32mp15_ip_addr);
>       }
> @@ -494,7 +494,7 @@ int ft_system_setup(void *blob, struct bd_info *bd)
>       if (IS_ENABLED(CONFIG_STM32MP13X))
>               stm32mp13_fdt_fixup(blob, soc, cpu, name);
>  
> -     if (IS_ENABLED(CONFIG_STM32MP15x)) {
> +     if (IS_ENABLED(CONFIG_STM32MP15X)) {
>               stm32mp15_fdt_fixup(blob, soc, cpu, name);
>  
>               /*
> @@ -505,7 +505,7 @@ int ft_system_setup(void *blob, struct bd_info *bd)
>                * under CONFIG_STM32MP15x_STM32IMAGE only for compatibility
>                * when FIP is not used by TF-A
>                */
> -             if (IS_ENABLED(CONFIG_STM32MP15x_STM32IMAGE) &&
> +             if (IS_ENABLED(CONFIG_STM32MP15X_STM32IMAGE) &&
>                   !tee_find_device(NULL, NULL, NULL, NULL))
>                       stm32_fdt_disable_optee(blob);
>       }
> diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
> index 6d1b76ba43a8..5efac658cf4d 100644
> --- a/board/st/common/Kconfig
> +++ b/board/st/common/Kconfig
> @@ -1,7 +1,7 @@
>  config CMD_STBOARD
>       bool "stboard - command for OTP board information"
>       depends on ARCH_STM32MP
> -     default y if TARGET_ST_STM32MP25X || TARGET_ST_STM32MP15x || 
> TARGET_ST_STM32MP13X
> +     default y if TARGET_ST_STM32MP25X || TARGET_ST_STM32MP15X || 
> TARGET_ST_STM32MP13X
>       help
>         This compile the stboard command to
>         read and write the board in the OTP.
> diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
> index 7d0d41bfea05..96de41546f1d 100644
> --- a/board/st/stm32mp1/Kconfig
> +++ b/board/st/stm32mp1/Kconfig
> @@ -1,4 +1,4 @@
> -if TARGET_ST_STM32MP15x
> +if TARGET_ST_STM32MP15X
>  
>  config SYS_BOARD
>       default "stm32mp1"
> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
> index 8f5719c28b33..a17c314daeb8 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -114,7 +114,7 @@ int checkboard(void)
>       int fdt_compat_len;
>  
>       if (IS_ENABLED(CONFIG_TFABOOT)) {
> -             if (IS_ENABLED(CONFIG_STM32MP15x_STM32IMAGE))
> +             if (IS_ENABLED(CONFIG_STM32MP15X_STM32IMAGE))
>                       mode = "trusted - stm32image";
>               else
>                       mode = "trusted";
> @@ -616,7 +616,7 @@ error:
>  
>  static bool board_is_stm32mp15x_dk2(void)
>  {
> -     if (CONFIG_IS_ENABLED(TARGET_ST_STM32MP15x) &&
> +     if (CONFIG_IS_ENABLED(TARGET_ST_STM32MP15X) &&
>           of_machine_is_compatible("st,stm32mp157c-dk2"))
>               return true;
>  
> @@ -625,7 +625,7 @@ static bool board_is_stm32mp15x_dk2(void)
>  
>  static bool board_is_stm32mp15x_ev1(void)
>  {
> -     if (CONFIG_IS_ENABLED(TARGET_ST_STM32MP15x) &&
> +     if (CONFIG_IS_ENABLED(TARGET_ST_STM32MP15X) &&
>           (of_machine_is_compatible("st,stm32mp157a-ev1") ||
>            of_machine_is_compatible("st,stm32mp157c-ev1") ||
>            of_machine_is_compatible("st,stm32mp157d-ev1") ||
> diff --git a/configs/stm32mp15_basic_defconfig 
> b/configs/stm32mp15_basic_defconfig
> index 3032d83b992e..005f1d55f80e 100644
> --- a/configs/stm32mp15_basic_defconfig
> +++ b/configs/stm32mp15_basic_defconfig
> @@ -13,7 +13,7 @@ CONFIG_SPL_STACK=0x30000000
>  CONFIG_SPL=y
>  CONFIG_CMD_STM32KEY=y
>  CONFIG_TYPEC_STUSB160X=y
> -CONFIG_TARGET_ST_STM32MP15x=y
> +CONFIG_TARGET_ST_STM32MP15X=y
>  CONFIG_ENV_OFFSET_REDUND=0x2C0000
>  CONFIG_CMD_STM32PROG=y
>  CONFIG_SPL_SPI_FLASH_SUPPORT=y
> diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig
> index 4aff6398846f..3302b3069965 100644
> --- a/configs/stm32mp15_defconfig
> +++ b/configs/stm32mp15_defconfig
> @@ -9,7 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
>  CONFIG_DDR_CACHEABLE_SIZE=0x8000000
>  CONFIG_CMD_STM32KEY=y
>  CONFIG_TYPEC_STUSB160X=y
> -CONFIG_TARGET_ST_STM32MP15x=y
> +CONFIG_TARGET_ST_STM32MP15X=y
>  CONFIG_ENV_OFFSET_REDUND=0x940000
>  CONFIG_CMD_STM32PROG=y
>  # CONFIG_ARMV7_NONSEC is not set
> diff --git a/configs/stm32mp15_trusted_defconfig 
> b/configs/stm32mp15_trusted_defconfig
> index ec32f1ea0f2c..84b0854b5573 100644
> --- a/configs/stm32mp15_trusted_defconfig
> +++ b/configs/stm32mp15_trusted_defconfig
> @@ -9,8 +9,8 @@ CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
>  CONFIG_DDR_CACHEABLE_SIZE=0x10000000
>  CONFIG_CMD_STM32KEY=y
>  CONFIG_TYPEC_STUSB160X=y
> -CONFIG_STM32MP15x_STM32IMAGE=y
> -CONFIG_TARGET_ST_STM32MP15x=y
> +CONFIG_STM32MP15X_STM32IMAGE=y
> +CONFIG_TARGET_ST_STM32MP15X=y
>  CONFIG_ENV_OFFSET_REDUND=0x2C0000
>  CONFIG_CMD_STM32PROG=y
>  # CONFIG_ARMV7_NONSEC is not set
> diff --git a/drivers/clk/stm32/Kconfig b/drivers/clk/stm32/Kconfig
> index 7dbddd032b89..c05015efe8b4 100644
> --- a/drivers/clk/stm32/Kconfig
> +++ b/drivers/clk/stm32/Kconfig
> @@ -23,7 +23,7 @@ config CLK_STM32_CORE
>  config CLK_STM32MP1
>       bool "Enable RCC clock driver for STM32MP15"
>       depends on ARCH_STM32MP && CLK
> -     default y if STM32MP15x
> +     default y if STM32MP15X
>       help
>         Enable the STM32 clock (RCC) driver. Enable support for
>         manipulating STM32MP15's on-SoC clocks.
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>

Thanks
Patrice

Reply via email to