Fix relocation of u-boot for s5p4418-SoC. I.e. use __image_copy_start
instead of _start to calculate the monitor length. Furthermore use an
adapted version of relocate_vectors for the s5p4418-SoC. Background:
The header (NSIH) used by the 2nd-bootloader (included at the begin of
u-boot.bin) is not loaded into RAM. Therefore _start has to be after
the header and therefore is not equal to __image_copy_start which is
at the begin of the header.
Changes in v3:
- MICROBLAZE has not built anymore. Therefore do change calculation of
gd->mon_len for ARCH_NEXELL only. This makes sure that MICROBLAZE and
other ARM-boards are not affected.
Changes in v2:
- Cosmetic: Fix spelling mistake in commit message
Stefan Bosch (2):
common: board_f: change calculation of gd->mon_len to fix s5p4418
reloc
arm: s5p4418: fix relocation of vectors
arch/arm/cpu/armv7/s5p4418/Makefile | 3 +++
arch/arm/cpu/armv7/s5p4418/relocate.S | 24 ++++++++++++++++++++++++
common/board_f.c | 4 +++-
3 files changed, 30 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/cpu/armv7/s5p4418/relocate.S
--
2.17.1
