On Sun, Jan 28, 2024 at 12:08 PM Tejas Bhumkar <[email protected]> wrote: > > The current implementation encounters issues when testing data ranging > from 0 to 8 bytes. This was confirmed through testing with both ISSI > (IS25WX256) and Micron (MT35XU02G) Flash exclusively in SDR mode. > > Upon investigation, it was observed that utilizing the > "SPI_NOR_OCTAL_READ" flag and attempting to read less than 8 bytes in > STIG mode results in a read failure, leading to a compare test failure. > > To resolve this issue, the CMD_4BYTE_FAST_READ opcode is now utilized > instead of CMD_4BYTE_OCTAL_READ, specifically in SDR mode. > > This is based on patch series: > https://lore.kernel.org/all/[email protected]/ > > Signed-off-by: Tejas Bhumkar <[email protected]> > ---
Applied to u-boot-spi/master
